ROSE DISPLAYS SUPERSNAP WITH MULTICLIPS Instruction Sheet

SuperSnap™

Parts

Instructions for assembly

Step 1

Snap the SuperSnap open and insert
poster (top and bottom). Fig. 1
Note: It is easier to open and close
the SuperSnap by starting at one
end and working your way down
the holder.

Step 2

To close, snap the SuperSnap shut.
Fig. 2

Step 3

Squeeze sides of MultiClip together.
Fig. 3 Align the bottom rail of the
MultiClip with the top channel of
the plastic holder. Slide MultiClip
into rail. Fig. 4 Repeat step 3 for
second MultiClip.

Step 4

Push end caps into place. Fig 5

Step 5

Suspend poster. Finished Look

Important note:

Please save and reuse the
SuperSnap, End Caps and
MultiClips for future projects.
The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSSuperSnap
Incept-8.5.02
Instruction Sheet
SuperSnap
12S300
Figure 3
Figure 5
MultiClips
1UP-0100
Figure 1
End Caps
06-5475
Figure 2
Figure 4
Finished Look
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com