ROSE DISPLAYS SUPERSNAP WITH CABLE AND BALL Instruction Sheet

SuperSnap™

Parts

Instructions for assembly

Step 1

Snap the SuperSnap open and insert
poster (top and bottom). Fig. 1
Note: It is easier to open and close
the SuperSnap by starting at one
end and working your way down
the holder.

Step 2

To close, snap the SuperSnap shut.
Fig. 2

Step 3

Insert ball into top rail of the holder.
Fig. 3
Note: It is easiest to slide the ball
into the holder if you hold the cable
as close to the ball as possible. Fig. 4

Step 4

Push end caps into place. Fig 5

Step 5

Suspend Poster.

Finished Look

Important note:

Please save and reuse the
SuperSnap, End Caps, and Cable and
Ball for future projects.
The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #01INSSuperSnapCableBall
Incept-11.05.01
Instruction Sheet
SuperSnap
End Caps
12S300
Cable and Ball
16-0018P
Figure 1
Figure 3
Figure 5
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
Figure 2
Figure 4
Finished Look
35 Congress Street, Salem, MA 01970
e-mail:signware@rosedisplays.com