ipv6 rip debug-level
ipv6 rip debug-level
Configures the RIPng debug level for all debug types.
ipv6 rip debug-level level
Syntax Definitions
level
Defaults
parameter
level
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
This command sets the debug level for all configured types. You cannot set different levels for each
•
type.
Use the
ipv6 rip debug-type
•
When the debug level is set to 0, the log is turned off.
•
Example
-> ipv6 rip debug-level 50
Release History
Release 5.1.6; command was introduced.
Related Commands
ipv6 rip debug-type
MIB Objects
alaRipngDebug
alaRipngDebugLevel
page 2-70
Debug level. Valid range is 0 - 255.
default
0
command to specify the type of RIPng messages to debug.
Configures the type of RIPng messages to debug.
Release 5.1.6.R02 User Guide Supplement
IPv6 Commands
June 2005