Table of Contents
Advertisement
IPv6 Commands
ipv6 neighbor
Configures a static entry in the IPv6 Neighbor Table.
ipv6 neighbor ipv6_address hardware_address {if_name} slot/port
no ipv6 neighbor ipv6_address {if_name}
Syntax Definitions
ipv6_address
hardware_address
if_name
slot/port
Defaults
N/A.
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
Use the "no" form of the command to remove an entry from the IPv6 Neighbor Table.
Example
-> ipv6 neighbor 4132:86::203 00:d0:c0:86:12:07 Test 1/1
Release History
Release 5.1.6; command was introduced.
Related Commands
show ipv6 neighbors
MIB Objects
IPv6IfIndex
alaIPv6NeighborTable
alaIPv6NeighborNetAddress
alaIPv6NeighborPhysAddress
alaIPv6NeighborSlot
alaIPv6NeighborPort
alaIPv6NeighborRowStatus
Release 5.1.6.R02 User Guide Supplement
IPv6 address that corresponds to the hardware address.
MAC address in hex format (e.g., 00:00:39:59:F1:0C).
Name assigned to the interface on which the neighbor resides.
Slot/port used to reach the neighbor.
Displays IPv6 Neighbor Table.
June 2005
ipv6 neighbor
page 2-13
Advertisement
Table of Contents
