Using Can-Bus - Classe Audio CA-2100 Owner's Manual

Th e diagrams below illustrate how to connect the CAN-Bus hardware.
using CAN-Bus CAN-Bus is controlled via the touchscreen of any Delta series component. Th ere
is no master component, so Delta series systems where two or more units have
a touchscreen can be controlled through any of the touchscreens. However, it is
probably easiest to start using CAN-Bus through just one.
CAN-Bus is accessed by pressing the menu button on the face of the unit or
remote, then the status button, followed by the more button.
Any combination of models in any order without SSP-300 or SSP-600.
Any combination of models in any order with SSP-300 or SSP-600.
NOTE: Daisy chain may need to be terminated with CAN-Bus Terminator.
CAN-BUS
IN OUT
CAN-BUS
IN OUT
CAN-BUS
IN OUT
CAN-BUS
IN OUT
CAN-BUS
IN OUT
CAN-BUS
IN OUT
CAN-BUS
IN OUT
CAN-BUS
IN OUT
21