Using The Data Protector Express Installation Manager; Install Data Protector Express - HP BB118BV - StorageWorks Data Protector Express Package Installation Manual

6
If you are installing from a CD drive:
1. Insert the Data Protector Express CD-ROM.
2. If auto-mount is not enabled on your system, you must mount the CD-ROM yourself. Refer to the
3. Access the root directory on the CD-ROM. For example, on some Linux systems, type cd
4. To run the installation program, type ./install as the root user and press Enter.

Using the Data Protector Express Installation Manager

When the Data Protector Express Installation Manager screen appears, select one of the following options
(refer to the corresponding section):
•

Install Data Protector Express

•
Upgrade Data Protector Express
•
Remove Data Protector Express
To start and run the Data Protector Express Administrator, refer to the User's Guide and Technical
Reference.
Install Data Protector Express
Use this option to install Data Protector Express for the first time or to reinstall Data Protector Express.
1. Access the Data Protector Express Installation Manager screen (see Launch Data Protector Express
Installation Manager). Click Install.
2 The License Agreement screen appears. After you accept the Data Protector Express license
agreement, click Next.
3. The Select Install Option screen appears. Select the Quick, Recommended or Custom installation:
Type
Quick installation
following example for some Linux systems:
a. Access a terminal window.
b. Type mount /dev/cdrom /mnt/cdrom and press Enter.
c. Wait a moment for Linux to mount the CD-ROM.
/mnt/cdrom and press Enter to access the root directory on the installation CD-ROM.
NOTE: If Data Protector Express is running, you must close it before continuing.
The installation program detects the environment that you are running. If you run ./install
from inside of an X Window System, the installation program launches the graphical-based
installer. If you run ./install from outside of an X Window System, the installation program
launches the character-based installer.
Description
The installation program installs using the default installation values. The
following items are installed:
•
The Data Protector Express software in one of the following
directories:
Data Protector Express Installation Guide