Alemite 7149-E4 Service Instructions Manual

Model 7149-4 Series Hand Operated Bucket Pumps
The 7149-4 series of Alemite Bucket Pumps are designed to deliver lubricant to bearings of off-the-road
equipment with various types of grease fittings.
These pumps develop from 2500 to 5000 psi, delivering about 1/3 ounce per stroke with the lever
attached to the pump in the normal center position. The lubricant container has a capacity of 35 pounds.
See the chart below for the various models in the 7149-4 series, which are covered by the instruction
sheet.
MODEL PAGE
7149-A4 2-3
7149-C4 4
7149-D4 4
This document contains confidential information that is the property of Alemite, LLC
and is not to be copied, used, or disclosed to others without express written permission.
396534
SERVICE INSTRUCTIONS
Figure 1: Model 7149-A4 Bucket Pump
MODEL CHART
COMPONENTS IN ADDITION TO 7149-4 BUCKET PUMP
322434 Hose Assembly (Figure 4)
6617-G Hydraulic Coupler and Hose Assembly (Figure 5)
317854-5F Hose (Figure 6)
43706 Angle Body
A-112 Bushing (Figures 3, 6, and 12)
A-336 Pin-Type Fitting
50491 Coupler
171134 Plug Button
Alemite, LLC
167 Roweland Drive, Johnson City Tennessee 37601
www.alemite.com
Copyright 2006 by Alemite, LLC
©
7149-4 Series
SER 7149-4
Revision (8/06)