Cisco 15454-GBIC-LX= - 1000 Mbps GBIC Expansion Slot Hardware Installation Manual page 77

Appendix F Priming Access Points Prior to Deployment
Step 7 Use the controller CLI, controller GUI, or Cisco WCS to configure the access point with primary,
secondary, and tertiary controller names.
Step 8 If the access point is in a Controller Mobility Group, use the controller CLI, controller GUI, or Cisco
WCS to configure the Controller Mobility Group name.
Step 9 Use controller CLI, controller GUI, or Cisco WCS to configure the access point-specific 802.11a,
802.11b, and 802.11g network settings.
Step 10 Repeat Steps 4 to 9 for each access point.
When you successfully complete the configuration priming of all your access points, ensure that Master
setting is disabled on your controller. You can begin deploying the access points to their final
destinations.
OL-9977-05
Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide
F-3