Advertisement
Table of Contents
- 1 General Information
- 2 Safety Rules
- 3 Intended Use
- 4 General Safety and Accident Prevention Regulations
- 5 Maintenance
- 6 General Repair Instructions
- 7 Torque Settings
- 8 Wheel Bolts
- 9 Specifications
- 10 Engine Data
- 11 Operator's Platform
- 12 Cab Heater
- 13 Removing the Radiator
- 14 Installing the Radiator
- Download this manual
Advertisement
Table of Contents
Related Manuals for Claas MEDION 330
Summarization of Contents
General Information
Manual Introduction and Purpose
Explains the manual's purpose, content, and how to use it for machine maintenance and service.
CLAAS Repair Manual Structure
Details the manual's organization, page numbering system, and use of pictorials for clear instructions.
Pictorial Symbol Meanings
Defines common pictorial symbols used in the manual for quick recognition of actions and warnings.
Safety Rules
Critical Safety Instructions and Warnings
Emphasizes reading and observing all manual instructions to prevent accidents and ensure safe operation.
Warning Signs and Regulations
Identifies warning signs, intended use, and general safety regulations for accident prevention.
Safe Machine Operation Practices
Covers procedures for leaving the machine, maintenance safety, and basic operational safety checks.
Specific Component Safety
Highlights safety precautions for air conditioning systems and high-pressure hydraulic accumulators.
General Repair Instructions
Damage Analysis and Spare Parts Guidance
Instructions on identifying damage causes, ordering correct spare parts, and using genuine CLAAS parts.
Safety for Engine, Gearbox, and Alternator Repairs
Safety procedures for working on the engine, gearboxes, and alternator, including battery disconnection.
Fastener and Chain Tensioning Procedures
Guidance on chain tensioning, taper ring fasteners, and self-locking bolts, including torque and reuse.
Special Material and Bearing Installation
Details on liquid locking compound, lock collar bearings, and adapter sleeve bearing installation.
Hydraulic Fitting Installation and Leak Repair
Procedures for assembling and installing ferrule and profiled ring fittings on hydraulic lines.
Taper Fittings, Welding Safety, and Repair Tips
Covers taper fittings, welding safety, and general tips for efficient and correct repair work.
Torque Settings
Bolt and Nut Torque Specifications
Provides tightening torques in Nm for various bolts, cheese-head screws, and nuts based on property class.
Hydraulic and Brake Line Screw Joint Torques
Specifies tightening torques for hydraulic screw joints and brake line unions with sealing rings.
Wheel Bolt Torque Specifications
Details tightening torques for drive axle, rear axle, and rear drive axle wheel bolts.
Specifications
Lubricants, Fluids, and Capacities
Comprehensive chart listing lubricants, types, viscosities, and capacities for machine components.
Hydraulic System and Pressure Specifications
Details working hydraulic and hydrostatic ground drive pressures, including setting and operating pressures.
Engine and Cooling System Data
Provides engine specifications, including manufacturer, type, speeds, and cooling system fluid requirements.
Operator's Platform
Cab Frame and Panel Procedures
Instructions for removing and installing the cab's front frame, windscreen, and rear panel components.
Cab Heater Radiator Service
Step-by-step guide for removing and installing the cab heater radiator, including coolant handling.
Need help?
Do you have a question about the MEDION 330 and is the answer not in the manual?
Questions and answers