Related Manuals for Alfa Laval CB
Summarization of Contents
Preface
1.1 Intended use
The purpose and applications of the heat exchanger.
1.2 Prior knowledge
Required knowledge for operating and maintaining the heat exchanger.
1.3 Warranty conditions
Information regarding Alfa Laval's standard warranty.
1.4 Environmental compliance
Alfa Laval's commitment to environmental considerations.
Restricted substances
Compliance with REACH and RoHS directives for the heat exchangers.
Safety
2.1 Safety considerations
General safety precautions for using the heat exchanger.
2.2 Definitions of expressions
Explanation of hazard symbols (WARNING, CAUTION, NOTE).
2.3 Personal protective equipment
Details on necessary protective gear like shoes, helmets, goggles, and gloves.
Description
3.1 Function
Explanation of how the heat exchanger works and its components.
3.2 Name plates
Information found on the unit's name plate and its significance.
Installation
4.1 Unpacking
Instructions for opening the package and checking contents.
4.2 Lifting
Guidelines and warnings for safely lifting the heat exchanger.
4.3 Requirements
General requirements for safe installation and handling precautions.
4.4 Mounting
Recommendations for physically mounting the heat exchanger and tightening bolts.
Recommendations for GL products
Specific installation guidance for GL products, including orientation.
4.5 Installation in general
General procedures and safety notes for installing the heat exchanger.
Connections
Details on connecting threaded, brazed, and welded pipes to the heat exchanger.
4.6 Installation as evaporator or condenser
Specific installation guidance for using the unit as an evaporator or condenser.
4.7 Leak test
Procedure for performing a leakage test before operation.
Operation
5.1 Start-up
Step-by-step instructions for safely starting up the heat exchanger.
5.2 Unit in operation
Important checks and precautions while the heat exchanger is running.
5.3 Shut-down
Procedures for safely shutting down and draining the heat exchanger.
Maintenance
6.1 General guidelines regarding maintenance
Basic advice on maintaining the heat exchanger's material and avoiding corrosion.
6.2 Cleaning-In-Place
Information on using CIP equipment for cleaning the heat exchanger.
Fault tracing
7.1 Pressure drop problems
Steps to diagnose and resolve issues with increased pressure drop.
7.2 Heat transfer problems
Steps to diagnose and resolve issues with reduced heat transfer capacity.
Need help?
Do you have a question about the CB and is the answer not in the manual?
Questions and answers