Advertisement
Advertisement
Table of Contents
Related Manuals for AnyCubic Wash & Cure Machine 2.0
Summarization of Contents
Safety Instructions
General Safety Guidelines
Follow instructions, avoid damage, keep away from children/water, operate within limits.
Operational & Emergency Safety
Do not remove lid during curing, use scraper cautiously, cut power in emergencies.
Liquid Handling & Post-Use
Seal/store liquid properly, air dry models after washing.
Customer Support Contact
Contact customer service first for any product issues.
Product Overview
Anti-UV Lid and Sensor
Blocks UV light and detects lid coverage for safety.
Control Panel and Indicators
Touch interface for machine control and status indication.
UV LED and Heat Dissipation
Curing panel and air vent for heat dissipation.
Power Controls
Power switch for turning on/off and power socket for adapter.
Instructions
Wash Mode Operation
Detailed steps for washing 3D printed models using the machine.
Cure Mode Operation
Steps for post-curing 3D printed models to increase strength.
Maintenance
Washing Liquid Management
Procedures for filtering, reusing, and disposing of washing liquid.
Washing Bucket Rotor Cleaning
Instructions for disassembling and cleaning the washing bucket rotor.
Troubleshooting
Machine Power & Lid Issues
Solutions for power contact errors and lid not covered problems.
Rotor & Sound Issues
Addresses rotor movement, foreign matter, and abnormal operation sounds.
Model Appearance & Control Lights
Fixes for models turning white and non-illuminating control lights.
Need help?
Do you have a question about the Wash & Cure Machine 2.0 and is the answer not in the manual?
Questions and answers