Refrigerator Doors - Kenmore 4126 - 21.5 cu. Ft. Non-Dispensing Refrigerator Use And Care Manual

TOOLS NEEDED: 1/4", 1_,,, and %6" hex-head socket wrenches, aflat-head s crewdriver and a Phillips s crewdriver.
IMPORTANT: Before y oubegin, turntherefrigerator control OFE Unplug r efrigerator ordisconnect power. Remove foodandany
adjustable door o rutility bins from doors.
NOTE: Itmay only benecessary toremove either t hedoor h andle o rthedoors togetyour p roduct through t hedoorway ofyour
residence. Measure thedoor o pening t odetermine whether toremove therefrigerator handles orthedoors,
Door Removal
Top Left Hinge
A. Do Not Remove Screw
Handle Removal
(Optional)
Top Right Hinge
A. Do Not Remove Screw
Bottom Hinge
A. Do Not Remove Screw
Door Alignment
A. Leveling Screw
Handle Removal (optional)
1. Apply firm pressure with your hand on the face of trim, Slide
top trim up and bottom trim down away from handle. Lift trim
pieces off shoulder screws. See Graphic 1.
2. Remove handle screws and handles.
3. Move refrigerator into place, Replace handles as shown. See
Graphic 1.
Door Removal
1. Unplug refrigerator or disconnect power.
2. Open both refrigerator doors. Remove the base grille by
pulling up on the bottom outside corners. See Graphic 2.
3. Close both doors and keep them closed until you are ready to
lift them free from the cabinet,
4. Remove top left hinge cover and screws as shown, See
Graphic 3. Do not remove screw A.
5. Carefully lift freezer door straight up off bottom hinge, See
Graphic 4.
6. Remove top right hinge cover and screws as shown. See
Graphic 5, Do not remove screw A.
7. Carefully lift refrigerator door straight up off bottom hinge.
See Graphic 4.
8. It may not be necessary to remove the bottom hinge to move
the refrigerator through a doorway. Both bottom hinges have
similar construction.
• Disassemble the hinges as shown, See Graphic 6. Do not
remove screw A.
Door and Hinge Replacement
1. Replace both bottom hinges, if removed, Tighten screws.
2. Replace the freezer door by carefully lifting the door onto the
bottom left hinge.
NOTE: Provide additional support for the doors while the top
hinges are being replaced. Do not depend on the door magnets
to hold the doors in place while you are working.