Advertisement

500 SERIES FWD
500 SERIES FWD
1-PHASE: 523, 525 & 526 SERIES 19
3-PHASE: 523, 525 & 526 SERIES 17
INSTALLATION AND OPERATING MANUAL
PLEASE LEAVE WITH OPERATOR
A34/005 R9
ECN 8877 September 2019
1 |
P a g e

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 19 Series and is the answer not in the manual?

Questions and answers

Summarization of Contents

Guarantee
Delivery of Machines
Details the contents included with 1-phase and 3-phase food waste disposer machines upon delivery.
Rating Label Information
Explains how to check machine voltage suitability against the rating plate.
Introduction and Installation
Introduction to Food Waste Disposers
Provides context on the intended use and installation of the 500 series machines.
Installer Guidelines
Important information for installers to maximize benefit and ensure proper installation.
Installation Procedures by Model
Details specific installation requirements for models 523, 525, and 526.
Electrical Connection
Single Phase Machine Wiring
Instructions for connecting single-phase machines using the isolator box, RCD, and mains plug.
RCD Testing and Safety
Details the importance and procedure for testing the Residual Current Device (RCD).
Isolator Box and RCD Wiring Instructions
Step-by-step guide for wiring the isolator box and RCD unit for single-phase machines.
Usage
Prohibited Materials
Lists materials that must not be put into the machine to prevent damage or blockages.
Waste Feeding Best Practices
Advises on efficient waste disposal techniques and avoiding blockages.
Operation
523 Disposer Operation
Step-by-step guide for operating the 523 model food waste disposer.
525 & 526 Disposers Operation
Step-by-step guides for operating the 525 and 526 models.
Releasing a Jam
Jam Release Procedure
Detailed steps to safely clear jams and reset the machine.
Thermal Overload Note
Explains the 40-minute cooldown period for single-phase motors after a jam.
Water Flow Control
Adjusting Water Flow
Guide on how to adjust water flow for optimal performance and flushing.
Water Pressure Setting Recommendation
Recommendation for setting water pressure at the mid-point for first installation.
Cleaning, Maintenance, and Do's and Don'ts
Cleaning Procedures
Instructions for cleaning 523 and 525/526 models, including hopper access.
Maintenance Schedule
Details essential checks for motor seals and bearings every 12 months.
Operational Best Practices
Key actions to ensure safe and efficient operation of the food waste disposer.
Prohibited Operational Actions
Lists actions and materials to avoid during operation and cleaning.
Fault Diagnosis
Machine Does Not Start
Troubleshooting guide for issues where the machine fails to start.
Unexpected System Stop
Troubleshooting guide for instances where the machine stops unexpectedly during operation.
Fault Diagnosis (Continued)
Waste Not Processed
Troubleshooting steps for when the waste is not being processed correctly.
Ordering Spare Parts
Information for Ordering
Guidance on providing series and serial numbers for ordering spare parts and support.

Table of Contents