Related Manuals for Nexo PS10R2 & LS600
Summarization of Contents
PS and LS General Setup Instructions
Speaker and Subwoofer Connections
Details on Speakon connectors for PS8, PS10R2, PS15R2, and LS subwoofers.
PS15R2 Mode Configuration
Guide to configuring the PS15R2 for passive or active mode using internal connectors.
System Cabling Guidelines
Recommendations for selecting appropriate cable sections based on load impedance and length.
Recommended Amplification
Overview of compatible NEXO TD Controllers and recommended amplification for PS and LS systems.
NEXO TD Controller Setups
Information on setting up PS and LS systems using NEXO TD Controllers, including firmware.
Connection Diagrams
PS8/LS400 DTDAMP4x1.3 Wiring
Diagram for connecting PS8 and LS400 with DTDAMP4x1.3.
PS10R2/LS600 DTDAMP4x1.3 Wiring
Diagram for connecting PS10R2 and LS600 with DTDAMP4x1.3.
PS15R2 Passive/LS18 DTDAMP4x1.3 Wiring
Wiring for PS15R2 (passive) and LS18 with DTDAMP4x1.3.
PS8/LS400 NXAMP4x1mk2 (4-Channel) Wiring
Diagram for PS8/LS400 with NXAMP4x1mk2 in 4-channel mode.
LS400 NXAMP4x1mk2 (4-Channel) Wiring
Wiring diagram for LS400 with NXAMP4x1mk2 in 4-channel mode.
PS8 & LS400 NXAMP4x1mk2 (4-Channel) Wiring
Diagram for PS8 and LS400 with NXAMP4x1mk2 (4-channel).
PS10R2/LS600 NXAMP4x1mk2 (Bridge Stereo) Wiring
Wiring for PS10R2/LS600 with NXAMP4x1mk2 (bridge stereo).
PS15R2 Passive/LS18 NXAMP4x1mk2 (Bridge Stereo) Wiring
Wiring for PS15R2 (passive) and LS18 with NXAMP4x1mk2 (bridge).
PS8/LS400 NXAMP4x2mk2 (4-Channel) Wiring
Diagram for PS8/LS400 with NXAMP4x2mk2 in 4-channel mode.
PS10R2 NXAMP4x2mk2 (4-Channel) Wiring
Wiring for PS10R2 with NXAMP4x2mk2 in 4-channel mode.
LS600 NXAMP4x2mk2 (4-Channel) Wiring
Diagram for LS600 with NXAMP4x2mk2 in 4-channel mode.
PS10R2/LS600 NXAMP4x2mk2 (4-Channel) Wiring
Wiring for PS10R2/LS600 with NXAMP4x2mk2 (4-channel).
PS15R2 Passive/LS18 NXAMP4x2mk2 (4-Channel) Wiring
Wiring for PS15R2 (passive) and LS18 with NXAMP4x2mk2 (4-channel).
PS8/LS400 NXAMP4x4mk2 (4-Channel) Wiring
Diagram for PS8/LS400 with NXAMP4x4mk2 in 4-channel mode.
PS10R2/LS600 NXAMP4x4mk2 (4-Channel) Wiring
Wiring for PS10R2/LS600 with NXAMP4x4mk2 (4-channel).
PS15R2 Passive NXAMP4x4mk2 (4-Channel) Wiring
Wiring for PS15R2 (passive) with NXAMP4x4mk2 (4-channel).
PS15R2 Active NXAMP4x4mk2 (4-Channel) Wiring
Wiring for PS15R2 (active) with NXAMP4x4mk2 (4-channel).
LS18 Omni/Cardio NXAMP4x4mk2 Wiring
Wiring for LS18 (Omni/Cardio) with NXAMP4x4mk2.
PS15R2 Passive/LS18 NXAMP4x4mk2 (4-Channel) Wiring
Wiring for PS15R2 (passive) and LS18 with NXAMP4x4mk2 (4-channel).
Configurable Asymmetrical Horn
Asymmetrical Horn Principle
Explanation of the PS Series asymmetrical horn and its dispersion characteristics.
Horn Configuration Adjustment
Procedure for changing the horn orientation for different coverage patterns.
Front of House Horn Configuration
Setting the horn for optimal 'front of house' audience coverage.
Stage Monitor Horn Configuration
Setting the horn for optimal 'stage monitor' coverage for performers.
PS Series Hardware Setup Procedure
General Safety First
Essential safety guidelines for installing and deploying PS Series systems.
Flown Systems Safety
Safety rules and procedures for flying PS and LS loudspeaker systems.
Ground Stacking Safety
Safety measures for building and securing ground-stacked PA systems.
Industry Contacts for Training
List of organizations for loudspeaker flying system training and information.
Product General Description
Overview of PS10R2, PS15R2, LS600, and LS18 speaker and subwoofer features.
Accessory Mounting Plates
Description of connecting plates on PS10R2, PS15R2, LS600, and LS18 for accessory mounting.
PS and LS System Accessories
Visual guide to various PS and LS mounting and rigging accessories.
Accessory Usage Warnings
Important warnings regarding the use of NEXO-approved accessories and unsafe assemblies.
Described Mounting Configurations
Illustrations of various fixed and touring installation configurations for PS and LS systems.
Wall/Ceiling Mounting for PS Series
Procedure for rigidly mounting PS speakers on walls or ceilings using U-brackets.
Ceiling Mounting for PS10R2/PS15R2/LS600 (Vertical)
Guide for vertically suspending PS10R2, PS15R2, or LS600 on a ceiling.
Ceiling Mounting for PS15R2 (Horizontal)
Procedure for horizontally suspending PS15R2 on a ceiling.
Vertical Wall Mount for PS/LS600
Procedure for vertically mounting PS and LS600 speakers on walls.
Horizontal Wall Mount for PS8/PS10R2
Procedure for horizontally mounting PS8 and PS10R2 speakers on walls.
Rigid Ceiling Mount for LS18/PS15R2 Array
Procedure for rigidly mounting LS18 and PS15R2 arrays to a ceiling.
Cable Mount for LS18/PS15R2 Ceiling Array
Procedure for cable suspending LS18 and PS15R2 arrays from a ceiling.
Described Touring Configurations
Illustrations of various touring setup configurations for PS and LS systems.
PS Speaker Stand and LS Subwoofer Mounting
Procedure for mounting PS speakers on stands or LS subwoofers.
Vertical Flying for PS Series
Procedure for vertically suspending PS series speakers using flying bars or truss hooks.
Horizontal Flying for PS Series
Procedure for horizontally suspending PS series speakers using U-brackets.
Vertical Flying for LS18 Subwoofers
Procedure for vertically suspending LS18 subwoofers using rigging plates and bumpers.
Ground Stacking LS18 Subwoofers
Procedure for ground stacking LS18 subwoofers using the GPT-GSTK device.
System Testing and Maintenance
Guidelines for checking fasteners and cleaning PS and LS rigging systems.
System Check Alignment Guidelines
Stacked LS and Flown PS Alignment
Procedure for aligning stacked LS and flown PS systems for optimal time alignment.
Driving LS from AUX Send
Considerations for driving LS subwoofers from an AUX send, focusing on phase alignment.
Recommended Tools and Equipment
List of essential tools and equipment for system installation and alignment.
Technical Specifications
LS18 and LS18-E System Specifications
Detailed specifications for LS18 and LS18-E subwoofers, including frequency response and power.
LS600 System Specifications
Detailed specifications for the LS600 subwoofer, including frequency response and power.
LS400 System Specifications
Detailed specifications for the LS400 subwoofer, including frequency response and power.
PS15R2 System Specifications
Detailed specifications for the PS15R2 speaker, including frequency response and power.
PS15R2 Performance Diagrams
On-axis response, impedance, and coverage diagrams for the PS15R2 speaker.
PS10R2 System Specifications
Detailed specifications for the PS10R2 speaker, including frequency response and power.
PS10R2 Performance Diagrams
On-axis response, impedance, and coverage diagrams for the PS10R2 speaker.
PS8 System Specifications
Detailed specifications for the PS8 speaker, including frequency response and power.
PS8 Performance Diagrams
On-axis response, impedance, and coverage diagrams for the PS8 speaker.
VNI-UBRK8 Bracket Details
Parts list and dimensions for the VNI-UBRK8 U-bracket.
VNI-UBRK10 Bracket Details
Parts list and dimensions for the VNI-UBRK10 U-bracket.
VNI-UBRK12 Bracket Details
Parts list and dimensions for the VNI-UBRK12 U-bracket.
VNI-ABRK Mounting Plate Details
Parts list and dimensions for the VNI-ABRK mounting plate.
VNI-LBRK Mounting Plate Details
Parts list and dimensions for the VNI-LBRK mounting plate.
VNI-WS8 Wall Mount Details
Parts list and dimensions for the VNI-WS8 wall mount.
VNI-WS10 Wall Mount Details
Parts list and dimensions for the VNI-WS10 wall mount.
VNI-WS15 Wall Mount Details
Parts list and dimensions for the VNI-WS15 wall mount.
GPI-BUMPER Details
Parts list and dimensions for the GPI-BUMPER installation bumper.
GPI-ANPL1 Angle Plate Details
Parts list and dimensions for the GPI-ANPL1 angle plate.
GPI-ANPL3 Angle Plate Details
Parts list and dimensions for the GPI-ANPL3 angle plate.
LSI-CPLA Mounting Plate Details
Parts list and dimensions for the LSI-CPLA mounting plate.
VNI-IPCOV8 Connector Box Details
Parts list and dimensions for the VNI-IPCOV8 connector box.
VNI-IPCOV15 Connector Box Details
Parts list and dimensions for the VNI-IPCOV15 connector box.
VNT-ADPT Flying Adaptor Details
Parts list and dimensions for the VNT-ADPT flying adaptor.
VNT-SSBRK8 Touring Cradle Details
Parts list and dimensions for the VNT-SSBRK8 touring cradle.
VNT-SSBRK10 Touring Cradle Details
Parts list and dimensions for the VNT-SSBRK10 touring cradle.
VNT-SSBRK15 Touring Cradle Details
Parts list and dimensions for the VNT-SSBRK15 touring cradle.
VNT-TCBRK Truss Hook Details
Parts list and dimensions for the VNT-TCBRK truss hook adapter.
VNT-XHBRK Lifting Ring Details
Parts list and dimensions for the VNT-XHBRK lifting ring.
VNT-TTC Angle Adapter Details
Parts list and dimensions for the VNT-TTC angle adapter.
GPT-BUMPER Details
Parts list and dimensions for the GPT-BUMPER touring bumper.
LST-XBOW18 Rigging Plates Details
Parts list and dimensions for LST-XBOW18 rigging plates.
VXT-BL820 Quick Release Pin Details
Parts list and dimensions for the VXT-BL820 quick release pin.
GPT-GSTK Ground Stack Device Details
Parts list and dimensions for the GPT-GSTK ground stack device.
LST-COVER18 Details
Details for the LST-COVER18 LS18 single cabinet cover.
LST-WB18 Details
Details for the LST-WB18 LS18 single cabinet wheelboard.
PS & LS Modules and Accessories List
Speaker and Subwoofer Modules
List of PS and LS speaker and subwoofer modules with descriptions.
NXAMP Controllers and Cards
List of NXAMP controllers and network/audio interface cards.
Need help?
Do you have a question about the PS10R2 & LS600 and is the answer not in the manual?
Questions and answers