Multifunction - GAS GAS EC ROOKIE - 2005 Service Manual

MULTIFUNCTION

Functions
NOTE
In order to select any of the functions, the motor must remain
stopped for ten seconds. A minute after selecting a function,
the screen will turn off automatically. It is activated again by
pressing the MODE key or putting on the motor.
Work mode
This option is selected by means of the MODE key. By pressing
START it goes from the deactivated state (OFF) to the activated
stated (ON) and viceversa.
When it is in the activated mode, the symbol
permanently on the screen. The gathering of data then begins and
the calculations are carried out to obtain the information which is
visualised in the function Chronometer, partial Distance, maximum
Speed and average Speed.
When OFF is pressed, the adquisition of data and the calculations
are detained, but the calculated values are not lost, and can be
v i s u a l i s e d b y s e l e c t i n g t h e c o r r e s p o n d i n g f u n c t i o n .
By activating once more the work mode (ON), the values previously
stored are wiped out.
- Work mode. This can be activated (ON) and deactivated (OFF).
- Clock. Indicates hour and minutes.
- Chronometer. Indicates the time passed since the last activation of the work mode.
ET
- Partial distance. Indicates the distance covered since the last activation of the work mode.
TD
MAX
- Maximum speed obtained since the last activation of the work mode.
AVE
- Average speed during the last activation of the work mode.
TOD - Total distance covered since the equipment was turned on.
KmH
- Instantaneous speed.
is visualised
Chronometer
The chronometer visualises the time passed since the last activation
of the work mode. Initially, minutes and seconds are visualised.
After an hour has passed, hours and minutes are visualised.
Maximum speed
This shows the maximum speed reached during the activated work
mode.
Average speed
This shows the average speed reached during the activated work
mode.
Total distance
This visualises the total distance covered since the moment when the
equipment was turned on for the first time.
The value accumulated is maintained permanently, even without
batteries, and is independent of the condition of the work mode.
29
- -