Shifting Gears - GAS GAS EC - 2005 Service Manual

NOTE
- When the engine is already warm or on hot days, open
the throttle instead of using the choke knob.
- If the engine is flooded, kick with the throttle fully open.
- If the clutch lever is pulled, the motorcycle can be
started while in any gear.
5. Even after the engine starts, keep the choke knob pulled up.
Stopping the engine (EC and SM models)
1. Shift the transmission into neutral.
(D)
3. Turn the key in counterclockwise direction to the "OFF" position.
(C)
4. Start the
motorcycle with
kick-start pedal (C).
2. After racing the
engine slightly,
close the throttle
completely and
depress the engine
stop button (D).
EC / MC / SM 2005 -
Stopping the engine (MC model)
1. Shift the transmission into neutral.
2. After racing the engine
slightly, close the throttle
completely and depress
the engine stop button
(A).

SHIFTING GEARS

The transmission is a 6-speed, of the return shift type. A return shift
means that to go from first gear to third gear it must go first through
the second gear, that is to say that it upshifts gears one by one. To
engage first gear from neutral, pull the clutch lever in and push down
on the gearshift pedal, then release the gearshift pedal and gently
release the clutch lever.
CAUTION
When shifting gears, press firmly on the gearshift pedal to ensure
a positive shifting. Careless, incomplete shifts can cause the
transmission to jump out of gear and cause engine damage.
(A). Gearshift pedal.
78
-
(A)
(A)