Precautions - AOC PD4264 User Manual

Precautions

.
1 Read all safety instructions and the User Manual before using the product.
2. The safety instructions and User Manual should be maintained in good condition for future reference.
3. Unplug the power connector before cleaning the product. A wet cloth is sufficient for the cleaning of the
product, never use liquid or spray cleaner for cleaning the product.
4. Always use the accessories recommended by the manufacturer to avoid any risk.
5. When moving the product from an area of low temperature to an area of high temperature, drops of water
may condense on the housing. Do not turn on the TV immediately after moving so as not to cause fire,
electric shock or component damage.
6. Do not install the product on unstable fixtures or stands. The installation of the product should be
conducted in accordance with the instructions and using the support recommended by the manufacturer.
7. Do not remove the earthing pin on the power plug. The product is supplied with a three-pin earthing-type
power plug, this plug will only fit an earthing-type power outlet. This is a safety feature, if you are unable to
insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the earthing plug.
8. Avoid overloading the power cord. Using extension cables or the cords of other appliances may cause fire
or electric shock.
9. If any of the following occurs please contact the retailer:
The power supply or connector fails.
Liquid sprays or any object drops into the TV.
The TV is exposed to rain or other moisture.
If the product doesn't function properly, you can only follow the instructions of the user manual to
make adjustment. Any damage caused by improper adjustment would require even longer time for
qualified technician to repair it.
The TV is dropped or damaged in any way.
The performance of the TV changes substantially.
10. A distance of at least 1 metre should be maintained between the product and any heat source, i.e. radiator,
heater, oven, amplifier etc.
11. To avoid the risk of electric shock or component damage, switch of the power before connecting the PDP to
other devices, such as VCR, DVD or PC.
12 The power cable must be replaced when using different voltage from that specified in the User Manual.
For more information, contact your dealer.
6