AOC PD4264 User Manual page 25

DISPLAY
POSITION
SIZE
PICTURE MODE
PIP SETUP
CLOCK
FOCUS
AUTO FOCUS
EXIT MENU
:
SELECT MAIN MENU
DISPLAY
POSITION
SIZE
PICTURE MODE
PIP SETUP
CLOCK
FOCUS
AUTO FOCUS
EXIT MENU
SELECT ITEM
DISPLAY
POSITION
SIZE
PICTURE MODE
PIP SETUP
CLOCK
FOCUS
AUTO FOCUS
EXIT MENU
:
ADJUSTMENT
DISPLAY
POSITION
SIZE
PICTURE MODE
PIP SETUP
CLOCK
FOCUS
AUTO FOCUS
EXIT MENU
:
ADJUSTMENT
Picture-in-Picture
You can select Picture-in-Picture (PIP) display mode to display
two different pictures on the screen.
Note: TV and audio pictures cannot be displayed at the same time
SINGLE
+000
16
：OK
1. Press MENU button to display the menu operation interface
SINGLE
+000
16
2. Press ADJ+/ADJ- button to select Display menu and then
3. Press ADJ+/ADJ- button to select the Display Mode under
：OK
4. Press ADJ+/ADJ- button again to select PIP, and then press
SINGLE
+000
16
You can also turn on PIP function by using remote control.
Meanwhile, you can use the buttons on the remote control to
：OK
operate more functions.
1．
2．
SINGLE
+000
3．
16
4．
：OK
under PIP mode.
When the component input is YCBCR, if the primary
picture input is TV or VIDEO, then only YCBCR and
S-VIDEO can be displayed as the secondary picture.
When the component input is YPBPR, if the primary
picture input is TV or VIDEO, then only S-VIDEO can be
displayed as the secondary picture.
on the screen.
press ENTER button.
Display menu, and then press the ENTER button (now the
Display Mode item glows red).
the ENTER button. PIP mode is displayed on the screen.
Button name
PIP
VIDEO
PIP I/P
SWAP
25
Function Descriptions
Turn on/off PIP/POP functions.
Select the display mode of the
primary picture.
Select the display mode of the
secondary picture.
Switch between the primary and
secondary pictures.