Basic Operations - AOC PD4264 User Manual

Basic Operations

POWER
To turn the unit ON and OFF:
1. Plug the power cord into an active AC power outlet and turn the main power switch on.
The pilot light of a Plasma Multimedia TV will flash red when the power supply has not reached a stable condition.
It lights constantly in red when the stable condition is reached.
Note: For the purpose of protecting the power supply, an interval of at least 5 seconds must be maintained before
turning ON the AC power after shutting it OFF. Shutting OFF the mains from a Standby Mode is strongly
recommended. A re-open of the unit shall be activated at least 3 seconds after the power indicator goes off.
2. Press the POWER button (on the remote control or the unit) to turn on the unit.
The TV's POWER/STANDBY indicator will flash red LED duration data was written until data ready to light up
blue LED.
3. Press the POWER button (on the remote control or the unit) ，the TV's POWER/STANDBY indicator will
flash red LED until finishing store up data then to light up red LED and the standby mode is set， then turn the main
power switch off.
VOLUME
To adjust the volume:
1. Press and hold the VOL + button (on the remote control or the unit) to increase to the desired level.
2. Press and hold the VOL - button (on the remote control or the unit) to decrease to the desired level.
MUTE
To cancel the sound:
Press the MUTE button on the remote control to cancel the sound; press again to restore.
SLEEP
To set the off timer:
The off timer can be set to turn the power off after 030, 060, 090 or 120 minutes.
1. Press the SLEEP button to start the timer at 30 minutes.
2. Press the SLEEP button to the desired time.
3. The timer start when the menu off.
→ 030 → 060 → 090 → 120 → 000 →
To cancel the off timer:
Press the SLEEP button until on screen display "000" to turn off the "SLEEP" function.
If you turn off the Plasma TV after the timer is set, the timer setting will be erased, please readjust the setting.
21