Page 1: Table Of Contents
PD5084 Color Plasma Display Television User’s Manual Content Safety Precautions Features and Fuction ..........2 Prepare Prepare ............3 Set up TV Cable and Turn on Power ......4 Turn on the TV Set ..........5 Remote Control Transmitter Setup ....... 5 Front Panel Controls ..........
Page 2: Safety Precautions
Safety Precautions WARNING 1) To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. ( including on shelves above, etc.) 2) To prevent electric shock, do not remove cover.
Page 3: Features And Fuction
Features and Fuction 50 inch（127cm）Large Screen Flat Panel Plasma Display Panel Resolution: WXGA（1366 x 768 Pixels） MAX Brightness of Panel: 1000 cd/m MAX Contrast Ratio of Panel: 3000:1 View Angle: Greater than 160° Internal Dual TV Tuner, Support 180 channels Dual Video, Dual S-Video, Single Y/Cb/Cr（480i, 576i）...
Page 4: Prepare
Prepare 1. Prepare Appearance must see the Real TV Set This picture is for reference. ● Do not place the Plasma TV on sloped or unstable surfaces. ● Do not place any objects on top of the Plasma TV. ● This Plasma TV radiates infrared rays, therefore it may affect other infrared communication equipment.
Page 5: Set Up Tv Cable And Turn On Power
2. Set up TV Cable and Turn on Power RF connection: Connect the Aerial lead into the TV Aerial socket. Note: Additional equipment and cables shown are not supplied Antenna Lead with this set.
Page 6: Turn On The Tv Set
Connect the AC cord plug to the TV Set: Connect the AC power cord plug to the ”AC IN” jack, Connect the other side ○ plug to the Wall Outlet. Press the Power switch“ ”on the Plasma TV to turn the set on.
Page 7: Connection To Other Equipment
5. Front Panel Controls - CH + - VOL + MENU MODE ⑦ ⑥ ⑤ ④ ③ ② ① IR: Remote Control aim at this part. （infrared ray Receiver） ① : Power Key. Press the key into standby or Turn on state. ②...
Page 8: Input Connection Of Video Signal（Dvd/Vcd/Vcr
Input Connection of Video Signal（DVD/VCD/VCR） We have 2 AV input jacks for VIDEO/AUDIO and S-VIDEO/AUDIO. The R / L is Audio input for every VIDEO and S-VIDEO. We have 2 components signal input jack: Y Cb Cr and Y Pb Pr. The R / L is Audio input for every Y Cb Cr and Y Pb Pr.
Page 9: Input Connection Of Pc Signal （Pc/Dvi-D
Input Connection of PC Signal （PC / DVI-D） ▲ Notice: The PC output can not set out of range The highest Resolution input is 1280 X 1024 / 60Hz Some PC models cannot be connected to the set...
Page 10: Output Connection Of Video Signal
● D-SUB 15 Pin: Connect D-SUB signal cable（VGA cable）from PC to D-SUB jack at the back of this TV Set. And connect earphone cable from PC earphone output jack to AUIDO input jack near to the D-SUB jack. Setup: Use the key “GRAPHIC”in Remote Control Transmitter or “MODE”key on Front panel controls select source to “D-SUB”state.
Page 11: Operation
Operation Operation of Remote Control Transmitter “COMP” “GRAPHIC” S-Video2、AV2、YCbCr、 D-SUB、DVI、Y，Pb，Pr S-Video1、AV1 source （HDTV）source input select key “MUTE＂Mute the sound “POWER” “TV” The TV Set turn on /turn TV1, TV2 source select, off key into TV state “MTS ＂ “ASPECT” MTS, Stereo, Mono Fill all, Normal, Wide, Sound change Zoom...
Page 12: Menu Fuction
Menu Fuction All the menu picture is for reference! Not real. 1. Press “ MENU” key on Remote Control Transmitter or Front panel controls 2. Press “CH+▲ / CH -▼ ”Move the cursor up and down select sub menu item 3.
Page 13 2、SOUND To Sound adjust menu BASS: Adjusts lower deeper sounds 0 ~ 100 Adjust TREBLE: Adjusts higher sharper sounds 0 ~ 100 Adjust BALANCE: Adjusts the sound level difference between left and right speakers 0 ~ 50 / 50~100 Adjust SURROUND: Surround ON / OFF EARPHONE VOL: No use in this type TV Set...
Page 14 3、CHANNEL To TV tuning menu SEARCH: Manual Tuning desired station Press VOL - 〈 / VOL + 〉 to search the lower or higher channel AUTO SEARCH: Automatically scans all TV channels and stores them in memory SKIP: Add or delete channel in memory FINE: Fine tuning this channel.
Page 15 ● FINE: Fine tuning the channel. The channel is users are watching. Press “ VOL –〈 ” or “ VOL + 〉” until the clear picture is received ● FAVORITE: Enter user’s favorite channel menu, edit and enter. Select this item and Press VOL + 〉 enter the favorite menu.
Page 16 5、LAYOUT（MultiWindows） To layout menu FULL SCREEN: Single Picture mode, press “ VOL +”key enter. PIP: Picture In Picture mode, press “ VOL+” key enter. SPLIT SCREEN: Two windows display mode, press “ VOL+” key enter. POP3: One large window and three windows aside display mode, Press “...
Page 17 POP3 GRID 6、 SETUP To setup menu COLOR SYSTEM: Select TV color system. AUTO、PAL、NTSC、SECAM. Advise user select: AUTO SOUND SYSTEM: Select TV color system. D/K、B/G、I、L、M. Select user’s local TV Sound system. Chinese user select: D/K American user select: M LANGUAGE: Select language in menu. English → 简体中文 → 繁体中文 BLUE SCREEN: Select no signal screen is blue or no blue screen.
Page 18 7、TIMER To Timer menu CURRENT TIME: Set current time. POWER ON TIME: Set the power on time. Need set current time and power off to standby state. POWER ON CHANNEL: Once power on, display the channel user input. POWER OFF TIME: Set the power off time. Need to set current time. POWER SAVING TIMER: If no signal input, the TV Set will turn to standby state.
Page 19: Safety Notice
Safety Notice WARNING Do not place the Plasma TV on sloped or unstable surfaces. • The Plasma TV may fall off or tip over. Do not place any objects on top of the Plasma TV. • If water is spilt onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock.
Page 20: Cleaning And Maintenance
If water or foreign objects get inside the Plasma TV, if the Plasma TV is dropped, or if the cabinet becomes damages, disconnect the power cord plug immediately. • A short circuit may occur, which could cause fire. Contact your local dealer for any repairs that need to be made.
Page 21: Specification
Specification Item Specification Screen size 50 inch plasma display panel Aspect 16:9 Display pixels 1366 x 768 (WXGA) Panel Effective display size mm x 1106 Spec Number of color 1670 million colors Contrast Ration 3000:1 (in dark room) Peak brightness 1000 cd/㎡...
Page 22: Troubleshooting
Troubleshooting If there is a problem with your TV Set, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local dealer, quoting the model number and serial number (both found on the rear of this TV Set).

AOC PD5084 User Manual

Safety Precautions

Features and Fuction

Prepare

Connection to Other Equipment

Operation

Safety Notice

Specification

Troubleshooting

Quick Links

Related Manuals for AOC PD5084

Summary of Contents for AOC PD5084

Table of Contents