AOC PD4264 User Manual page 30

TV SETUP
USER CH
SYSTEM SETUP
CH MAPPING
CH FINE TUNE
AUTO FINE TUNE
NICAM
EXIT MENU
:
SELECT MAIN MENU
TV SETUP
USER CH
SYSTEM SETUP
CH MAPING
CH FINE TUNE
AUTO FINE TUNE
NICAM
EXIT MENU
SELECT ITEM
SYSTEM SETUP
COLOR SYSTEM
SOUND SYSTEM
FREQUENCY TYPE
EXIT MENU
SELECT ITEM
TV SETUP
USER CH
SYSTEM SETUP
CH MAPING
CH FINE TUNE
AUTO FINE TUNE
NICAM
EXIT MENU
SELECT ITEM
TV Setup Operations
You can use your PDP in many different countries. Each country
has its own TV broadcast standard. You can select the TV system
you need in the TV Setting menu based on the TV standard of
10
your countr
User CH
+00
The user can setup the TV channels to a mode that he/she is more
OFF
familiar with.
MONO
CH Fine Tune/Auto Fine Tune
In some areas with weaker TV signals, you can use this function
：OK
to modify and correct the signal to obtain a better picture on the
screen.
1. Press the MENU button to display the menu operation
interface on the screen.
2. Press the ADJ+/ADJ- button to select the TV Setup menu and
2
then press ENTER button.
3. Press the ADJ+/ADJ- button to select the item you wish to
+00
adjust and then press the ENTER button to enter the selected
OFF
item (now the item glows red).
MONO
4. Adjustment Item...
System Setup
：OK
（The adjusting method is the same as the menu operation.）
CH Fine Tune
Auto Fine Tune
Nicam
5. If you are satisfied with the setup, press the ENTER button
PAL
DK
again to complete the setup (the selected adjustment item
TV
glows green again).
When you use the PDP's TV function the first time, we
：OK
recommend channel scanning after selecting the required TV
system. This lets you to watch more and higher quality TV
programs.
If the signal is weaker in the area you live, we recommend you
2
use the auto channel scanning.
1. Press the MENU button to display the menu operation
+00
interface on the screen.
OFF
2. Press the ADJ+/ADJ- button to select the TV Setup menu and
MONO
then press ENTER button.
3. Press the ADJ+/ADJ- button to select CH Mapping option
：OK
and then press ENTER button to enter the CH Mapping
adjustment item.
4. Press the ADJ+/ADJ- button again to select the Auto Fine
Tune option and then press ENTER button. This item glows
red.
5. Press the ADJ+/ADJ- button to select "on" and then press the
ENTER button. The system turns on the channel scanning
function.
y.
Increase or decrease
30
Press ADJ+/ADJ- ...
Select the item to adjust
On or off
Automatically recognize the format