AOC PD4264 User Manual page 16

Connecting Your VCR or Laser Disc Player
Use common RCA cables to connect your VCR or laser disc player to your plasma TV. To make these connections,
simply:
1. Turn off the power to your plasma TV and VCR or laser disc player.
2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc player,
connect the other end to the Video input on your plasma TV.
Use standard RCA audio patch cords to connect the audio from your VCR or laser disc player to your plasma TV
(if your VCR or laser disc player has this capability). Be careful to keep your right and left channel connections
correct for stereo sound.
3. Or use a standard S-Video cable to connect the S-Video Output of the VCR or CD player to the S-Video Input of
the Plasma Multimedia TV.
Use a standard audio cable to connect the S-signal Audio Output (if applicable) of the VCR or CD player to the
S-signal Audio Input of the Plasma Multimedia TV. Make sure the Right and Left channels of the stereo signal is
connected correctly
4. Turn on the plasma TV and the VCR or laser disc player.
Note: Refer to your VCR or laser disc player owner's manual for more information about your equipment's
video output requirements.
.
16