Chapter 2: Getting Started; Enltv-Fm3 Hardware Installation - Encore ENLTV-FM3 - V4 User Manual

ENLTV-FM3 User's Guide

Chapter 2: Getting Started

2.1 – ENLTV-FM3 Hardware Installation
Install the ENLTV-FM3 PCI Card to the computer's
available PCI slot according to your computers
manual and new hardware installation procedures.
Make sure that the computer's power cord is
unplugged before inserting the ENLTV-FM3 card to
the PCI slot. ENLTV-FM3 supports PCI bus 2.1 and
above.
Refer to the device connection diagram below for
port connections:
Caution:
Take an extra care handling the Remote sensor cable, do not insert or remove the sensor
cable while the computer is powered-on. Otherwise, it can cause the ENLTV-FM3 to
malfunction.
5