Page 1
ENLTV-DVB-S DVB-S PCI TV Tuner (PCI Satellite TV Receiver Card / Recorder) ENLTV-DVB-S Series User’s Guide...
Page 2
ENLTV-DVB-S User’s Guide - User’s Notice This manual is provided “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall we, its directors, officers, employees or agents...
2.2.2 Device driver installation for Windows Vista ...10 2.3 Install the ENLTV-DVB-S utility software...12 Chapter 3: Launch the Software ...14 3.1 Running the ENLTV-DVB-S for the first time..14 3.2 Record Video...16 Chapter 4: Using the Remote Control...17 4.1 Installing Batteries...17 4.2 Remote controller functions...17...
ENLTV-DVB-S User’s Guide - Chapter 1: Introduction 1.1 Package Contents Upon receiving your ENLTV-DVB-S, please make sure the following items are included in the ENLTV-DVB-S package. CD of Installation Software ENLTV-DVB-S Card Audio Cable 4 in 1 Audio / Video cable...
PC system’s power cord has not been connected to the power jack even when the PC’s power is in shutdown state. Turn on the PC power ONLY after the ENLTV-DVB-S has been firmly and securely plugged into the PCI slot. Refer to below wire connection diagram for correct connection:...
2.2 Device Driver Installation Place the CD-ROM that came with the ENLTV-DVB-S in the CD-ROM drive. (Assuming that the ENLTV-DVB-S PCI TV Tuner card is properly installed to the computer’s PCI slot), then follow the on-screen installation guide below. 2.2.1 Device driver installation for Windows XP 1.
Page 7
ENLTV-DVB-S User’s Guide - 4. Click “Install” button. 5. Click “Continue Anyway” to continue the installation. 6. Click “Continue Anyway” to continue the installation.
Page 8
ENLTV-DVB-S User’s Guide - 7. Click “Continue Anyway” to continue the installation. 8. Click “Continue Anyway” to continue the installation. 9. Click “Continue Anyway” to continue the installation.
Page 9
ENLTV-DVB-S User’s Guide - 10. Click “Continue Anyway” to continue the installation. 11. Click “Continue Anyway” to continue the installation. 12. Click “Continue Anyway” to continue the installation.
ENLTV-DVB-S User’s Guide - 2.2.2 Device driver installation for Windows Vista 13. Click “Finish” button to complete the DVB-S card Hardware Installation Wizard. 1. When the computer is powered on for the very first time during the setup, a message “Found New Hardware Wizard”...
ENLTV-DVB-S User’s Guide - 2.3 Install the ENLTV-DVB-S utility software. 1. Insert the installation CD-ROM into the CD-ROM drive. The setup will automatically appear. 2. Click “Setup Utility”. 3. Select the language and click “Next” button. 4. Click “Next” button...
Page 13
ENLTV-DVB-S User’s Guide - 5. Click “Next” button or choose different folder for installation. 6. Click “Install” button to start installing. 7. Click “Finish” to complete installation.
ENLTV-DVB-S User’s Guide - Chapter 3: Launch the Software 3.1 Running the ENLTV-DVB-S for the first time. Click “Start” on Windows Taskbar, and then select “All Programs” \ Encore \ ProgDVB At the first time running, please follow the setup steps as below.
Page 15
ENLTV-DVB-S User’s Guide - 3. Then all satellites must be scanned in Main Menu -> Channel list -> Search channels -> … 4. That’s all. After that, you’ll see the channels list and be able to watch then. Usually, the free channels will be marked with green color, and those encrypted channels will be marked with the red color.
ENLTV-DVB-S User’s Guide - 3.2 Record Video Click “Start” on Windows Taskbar, and then select “All Programs” \ Encore \ ProgDVB 2. Video Record 3. Video Source 4. Volume Control 1. Double click to full screen display. 2. Video Record: to start record video 3.
ENLTV-DVB-S User’s Guide - Chapter 4: Using the Remote Control The Remote controller allows you to operate the ENLTV-DVB-S remotely, such as turning your TV on/off, viewing the TV, and changing the channels and volume. Aim the front of the Remote Controller at the Remote Control Receiver and press the control buttons as you would on the infrared receiver.
ENLTV-DVB-S User’s Guide - Chapter 5: Supporting Center: For Technical Support, Installation Hotline or Contacts, please visit our web site at http://www.encore-usa.com...