ENLTV-3 User’s Guide Chapter 1: Introduction 1.1 - Package Contents The following items are included in the E NLTV-3 package. CD setup disc (includes Software Driver and Utility Software) ENLTV-3 PCI card Video cable Remote sensor cable Remote controller User’s guide 1.2 - System Requirements Intel®...
ENLTV-3 User’s Guide Chapter 2: Getting Started 2.1 – ENLTV-3 Hardware Installation Install the ENLTV-3 PCI Card to the computer’s available PCI slot according to your computers manual and new hardware installation procedures. Make sure that the computer’s power cord is unplugged before inserting the ENLTV-3 card to the PCI slot.
ENLTV-3 User’s Guide 2.2 - Device Driver Installation 1. Placed the CD software that comes with the ENLTV-3 in the CD-ROM drive. (Assuming that the ENLTV-3 Tuner card is properly installed to the computer’s PCI slot), then follow the on-screen installation guide below. Device driver installation for Windows®...
Page 7
ENLTV-3 User’s Guide 5. Click “Next” on driver setup welcome window to continue. 6. Click “Install” to begin install driver. 7. Click “Next” button.
Page 9
ENLTV-3 User’s Guide 11. Click “Finish” to reboot PC. 12. To make sure the driver is properly installed and started, open the “Device Manager”. Please double-click the “Sound, video and game controller”.
Page 10
ENLTV-3 User’s Guide Device driver installation for Windows® Vista 1. After ENLTV-3 hardware has been installed, the next time when the computer is powered-on, a message “Found New Hardware” dialogue box will appear on the screen. Click “Cancel” button to close “Found New Hardware”...
Page 12
ENLTV-3 User’s Guide 5. Click “Finish” button. 6. Click “Finish” button. 7. To make sure the driver is properly installed and started, open the “Device Manager”. Please double-click the “Sound, video and game controller”.
ENLTV-3 User’s Guide 2.3 - Install the DirectX® Microsoft DirectX® allows 3D hardware acceleration support in Windows® 98, 2000, Windows® XP 32bit/64bit and Windows® Vista 32bit/64bit. For software MPEG support in Windows® 98, you must first install Microsoft DirectX®, and then an MPEG compliant video player.
ENLTV-3 User’s Guide 2.4 - Install the ENLTV-3 Utility software. 1. Install TV application on Windows® XP 32bit/64bit 1. Insert the installation CD into the CD-ROM drive. The setup screen should automatically appear. 2. Click the “Setup Utility” 3. Select the language then click “Next”. 4.
Page 15
ENLTV-3 User’s Guide 5. Please read the License Agreement and click “Yes” button 6. Make sure the “Typical” radio button is selected then click “Next”. 7. Click “Next” button to accept the default location or choose a different folder Note: (We recommend not to change the default location)
Page 16
ENLTV-3 User’s Guide 8. Click “Next” button. 9. Click “Finish” to restart your computer NOTE: We recommend restarting your computer right after the Installation Wizard.
Page 17
ENLTV-3 User’s Guide 2. Install TV application on Windows® Vista 32bit/64bit 1. Insert the installation CD into the CD-ROM drive. The setup screen should automatically appear. 2. Click the “Setup Utility” 3. Select the language then click “Next”. 4. Click “Next” button.
Page 18
ENLTV-3 User’s Guide 5. Please read the License Agreement and click “Yes” button 6. Make sure the “Typical” radio button is selected then click “Next” 7. Click “Next” button to accept the default location or choose a different folder Note: (We recommend not to change the default location)
Page 19
ENLTV-3 User’s Guide 8. Click “Next” 9. Click “Finish” to restart your computer. NOTE: We recommend restarting your computer right after the Installation Wizard.
ENLTV-3 User’s Guide Chapter 3: Launch the ENLTV-3 Program 3.1 - Running the ENLTV-3 for the first time Click “Start”, move your mouse to “Programs\ENLTV-3” then click ENLTV-3 NOTE: When the ENLTV-3 Program is first started, it will prompt you to configure the Device Setting.
Page 21
ENLTV-3 User’s Guide Select the video signal format in your area (NTSC or PAL) from the “TV Tuner Standard” drop-down menu. Click “Next” This step will give you an option to scan for TV channels. Select which signal source you are connected to in the “TV Scan Type”...
ENLTV-3 User’s Guide 3.2 - Watch TV programs or movies from DVD/VCR/Camcorder 5.Double click to full screen 4.Channel Control 3.Volume Control 2.Search TV Channel 1.Source Switch 7.TV wall 6.Channel List 1. Source Switch: click it to select TV, Audio/Video or S-Video 2.
ENLTV-3 User’s Guide When you do a full screen display, you can use the panel bar to set up your TV box. Fix Panel: To fix the display panel. Show / Hide as mouse drags. Hide Panel: To hide the sub-panel. Snapshot: Same as "Snapshot"...
ENLTV-3 User’s Guide 3.4 - Using the Snapshot 1. Click the “Setting” button to setup the image format. 2. The ENLTV-3 support BMP and JPEG image format. The default is JPEG. Please choose your desired format. 3. Click “Snapshot” button to capture image. 3.5 - Playback Video 1.
Page 25
ENLTV-3 User’s Guide Exit: To exit the video playback window, [Esc] or [ALT]+[F4] on keyboard equalized Minimize: To minimize the video playback window, click "MoviePlayer" in desktop taskbar to restore display Hide Control Panel: To hide video control panel, right click video window and select "Control Panel"...
ENLTV-3 User’s Guide 3.6 - ImageViewer 1. Click the “ImageViewer” to retrieve the saved pictures. 2. You can use the “ImageViewer” software to control picture zoom in/out, or rename. The menu bar contains many function buttons for easy operations, these are: Refresh: To refresh the display snapshot image in current folder.
ENLTV-3 User’s Guide 3.7 – Time-Shifting Right click inside the ENLTV-3 video window and select the “Timeshift” function Video is now being recorded to your hard disk while showing live on screen. TimeShift You can click “pause” button or slide the “timer”...
ENLTV-3 User’s Guide Chapter 4: Using the Remote Control The Remote control allows you to operate the ENLTV-3 program, such as turning the TV on or off, changing channel and volume, etc. Aim the upper front side of the Remote Control to the Remote Control Receiver as you would do on other infrared remote control.
The ENLTV-3 driver and software should match. If step 1 did not work to fix the problem, uninstall the driver and the software, and then reinstalling then from the product CD again. If your product CD is not available with you, you can check our web site at http://www.encore-usa.com for download.
ENLTV-3 utility software, this way the CODEC link will also be reset. 3. Make sure that you meet the minimum system requirements. Chapter 6: Technical Support For Technical Support or Installation Hotline contacts please visit our web site at http://www.encore-usa.com...