Encore ENHWI-N3 User Manual page 30

The LAN Tab is where LAN settings can be change. If you are an entry level user,
after hooking up the cables, try to access the internet from your computer. If you can
open a website with no problem, leave the settings as it is. If changes were made,
click the button to save the changed configurations.
LAN IP
IP address: 192.168.0.1 is the router's LAN manufacturers default IP address (this
will also be the "Default Gateway" IP address of your LAN clients). It
can be change based on your LAN design and configurations. Typical
designs don't need to change this IP address.
IP Subnet Mask: 255.255.255.0 specifies the Subnet Mask address for your LAN
segment. This is based on the IP address range used.
802.1d Spanning Tree: This is disabled by default. If 802.1d Spanning Tree
function is enabled, this router will use the spanning
tree protocol to prevent network loops.
30