Table of Contents
Advertisement
If you wish to restart the router using the factory default settings (for example, after a
firmware upgrade or if you have saved an incorrect configuration), select Factory Default
Settings to reset to factory default settings. Otherwise, you can select Current Settings. You
may also reset your router to factory settings by holding the DEFAULT button on the back
panel of your router in for 10-12 second while the router is turned on.
4.6.5
Diagnostic
The Diagnostic Test page shows the test results for the connectivity of the physical
layer and protocol layer for LAN & WAN sides.
Note:
1) User ONLY can view PVC0's Diagnostic Test connection.
2) "Testing ADSL Synchronization" might take 30 sec to execute the Diagnostic Test.
70
Advertisement
Table of Contents
Need help?
Do you have a question about the ENDSL-A2PLUS4R2 and is the answer not in the manual?
Questions and answers