Page 2
SG1/SG2 INSTALLATION Preparation Protect your marine radio from damage and the harsh marine environment with the SG1/SG2 splashguard. This protective bezel and cover fits virtually any marine stereo on the market and will protect against splashes and spray. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions.
Page 3
SG1/SG2 INSTALLATION Mounting Mounting • After preparing dashboard as outlined on page 2, remove adhesive backing from foam gasket and adhere gasket to dashboard. Dashboard must be clean and dry to ensure proper adhesion. • Open splashguard and detach side covers by pulling outward from the inside of side cover.
Page 4
(preferably in the original package) and ship it by prepaid transportation with a copy of Dual Electronics Corp. agrees, at our option, the original receipt from the retailer to an during the warranty period, to repair any authorized service center.
Need help?
Do you have a question about the SG1 and is the answer not in the manual?
Questions and answers