Table of Contents
Advertisement
Operating manual
EN
Cold and hot water high-pressure cleaner
therm 635-1
therm 875-1
therm 895-1
therm 1165-1
www.kraenzle.com
Advertisement
Table of Contents
Related Manuals for Kränzle therm 895-1
Summarization of Contents
Explanatory Symbols
Symbols in the Operating Manual
Explains symbols for warnings, notes, and instructions within the manual.
Symbols on the High-Pressure Cleaner
Describes symbols found on the cleaner itself, indicating safety or operational guidance.
Symbols on Packaging
Explains symbols related to packaging, recycling, and disposal.
Symbols on the Control Panel
Symbols shown on the machine's control panel for operation and safety.
Symbols in the Short Instruction Manual
Symbols found in the short instruction manual, often illustrating steps.
Description of High-Pressure Cleaner
Design: Therm-1 Series Without Hose Drum
Details the components and layout of the therm-1 series without a hose drum.
Purchased Items: Therm-1 Series Without Hose Drum
Lists the items included in the purchase for this model variant.
Design: Therm-1 Series With Hose Drum
Details the components and layout of the therm-1 series with a hose drum.
Purchased Items: Therm-1 Series With Hose Drum
Lists the items included in the purchase for this model variant.
Operating Panel Construction
Explains the layout and functions of the machine's operating panel.
Interior Fittings Construction
Details the internal components and their arrangement within the cleaner.
General Rules
Intended Use
Specifies the correct and approved applications for the high-pressure cleaner.
Environmental and Disposal Regulations
Outlines mandatory regulations concerning environmental protection and waste disposal.
Inspections and Accident Prevention
Details required inspections and essential safety guidelines to prevent accidents.
Oil Change and Maintenance
Schedule and procedures for oil changes, leak checks, and fuel system care.
Decalcifying Procedure
Step-by-step guide on how to decalcify the machine's heat exchanger.
Fuel System Maintenance
Information on the fuel system, filters, and required maintenance.
Functional Details
Thermostat and Operating Hour Meter
Explanation of thermostat controls and the operating hour meter function.
Ignition, Temperature Safety, and Heat Exchanger
Details on ignition electrodes, excess temperature sensor, and heat exchanger operation.
Water Supply and Electrical Connection
Guidance on water quantity, supply, and electrical connection requirements.
System Components and Safety Features
Overview of water system, trigger gun, pressure valves, motor protection, and total stop.
Putting into Operation
Initial Setup and Component Installation
Steps for installing mains cable holders, water inlet filter, and filling fuel oil.
Hose and Lance Connections
Instructions for connecting the high-pressure hose, lance, and water supply hose.
Final Checks and Pressure Adjustment
Procedures for checking oil, connecting power, and adjusting operating pressure.
Cold and Hot Water Operation Modes
Guides for operating the cleaner in cold water and hot water modes.
Applying Additives
Suction of Detergents
How to use the detergent suction system for applying cleaning agents.
Taking out of Operation
Shutdown and Storage Procedures
Procedures for safely shutting down and preparing the cleaner for storage.
Particular Rules, Directives and Inspections
Kränzle Inspections and Guidelines
Details specific inspection points carried out by Kränzle and relevant guidelines.
Owner's Duties and Legislation
Outlines owner responsibilities and applicable legislation for operation.
Care and Maintenance: Weekly
Maintenance tasks to be performed weekly or after 50 operating hours.
Care and Maintenance: Yearly
Maintenance tasks to be performed annually or after 500 operating hours.
Oil Leakage Detection
Information on identifying and addressing oil leaks and potential damage.
Small Repairs - Do It Yourself
Troubleshooting: No Water or Irregular Jet
Steps to fix issues with water flow and spray pattern from the nozzle.
Troubleshooting: Cleaner Switching Issues
Steps to resolve problems with the cleaner repeatedly switching on and off.
Comprehensive Malfunction Summary
A consolidated list of common problems and their potential causes.
Diagnosing Displayed Errors and Heating Faults
Explains error codes, heating, and burner issues for troubleshooting.
Kränzle Accessories
Floor Washer and Washing Brushes
Details on Floor Washer Round Cleaner and various Washing Brushes.
Lances and Spray Attachments
Information on Double Lance, Turbokiller Lance, and Splash Guard accessories.
Suction Hose and Filter
Details about the suction hose with suction filter accessory.
Inspection Reports
Mandatory Annual Inspections
Emphasizes the mandatory annual inspection for industrial use according to safety guidelines.
Scope of Inspection Checks
Lists the specific items and checks included in the inspection process.
Inspection Result Recording
Sections for recording the outcome of the expert inspection and confirming safety status.
Kränzle Final Report
Report Data Fields
Fields to specify device type, connections, leak test, and electrical checks for the report.
Flue Gas Analysis Results
Section dedicated to recording the results of flue gas analysis tests and measurements.
Need help?
Do you have a question about the therm 895-1 and is the answer not in the manual?
Questions and answers