Related Manuals for BONFIGLIOLI A Series
Summarization of Contents
General Information
Purpose of the Manual
Explains the manual's objective: safe transport, handling, installation, maintenance, repair, disassembly, and dismantling of gear units.
Equipment Identification
Details how to identify gear units using nameplates and product codes.
Glossary and Terminology
Defines key terms used throughout the manual for clarity and understanding.
Requesting Technical Assistance
Provides guidance on how to contact the manufacturer for service needs.
Manufacturer's Liability
Outlines the manufacturer's disclaimer and responsibilities.
Technical Information
Gear Unit Description
Describes the design and purpose of the gear unit and its versatility.
Conformity to Standards
Details compliance with relevant directives and standards like ATEX.
Operating Limits and Conditions
Specifies environmental and operational limits for safe gear unit use.
Safety Information
Safety Standards
Outlines general safety rules and precautions for personnel and equipment.
Handling and Transport
Packaging
Describes standard packaging methods and storage conditions.
Handling Instructions
Provides instructions for safe handling of packages and equipment.
Storage
Recommends proper storage procedures to maintain gear unit integrity.
Installation
Installing the Gear Unit
Details the steps and precautions for installing the gear unit correctly.
Installing an IEC-Standard Flanged Motor
Explains the procedure for mounting an IEC-standard flanged motor.
Maintenance
Routine Maintenance
Outlines scheduled maintenance tasks for optimal performance.
Lubricants
Discusses lubricant types and their importance for gear unit function.
Oil Change
Describes the procedure for changing the gear unit's oil.
Recommended/Permitted Oils
Lists compatible oils and greases for Atex-certified gear units.
Checking Efficiency
Details how to check the gear unit's operational efficiency.
Cleaning
Provides instructions for cleaning the gear unit.
Paint Coating
Describes the paint coating process for gear unit casings.
Replacing Parts
Taking Apart of the IEC-Standard Flanged Motor
Explains how to disassemble the IEC-standard flanged motor.
Scrapping the Gear Unit
Outlines safe and compliant procedures for disposing of a gear unit.
Troubleshooting
Troubleshooting Guide
Provides a guide for identifying and correcting common gear unit defects and faults.
Need help?
Do you have a question about the A Series and is the answer not in the manual?
Questions and answers