Related Manuals for East Tester ET4502
Summarization of Contents
Installation Guide
Out of Box Check
Verify contents of standard and optional accessories upon receiving the instrument.
Power Connection
Details on voltage, frequency, and grounding requirements for safe power connection.
Fuses
Information about the fuses provided with the instrument.
Ambient Environment
Guidelines for optimal operating and storage conditions to ensure accuracy and longevity.
Test Fixture Usage
Instructions on using company-provided test fixtures/cables for accurate measurements.
Warm-up and Working Hours
Recommended warm-up time and continuous operation limits for instrument performance.
Other Instrument Characteristics
Specifications regarding power consumption and physical dimensions of the instrument.
Introduction to the LCR Bridge
General Technical Specifications
Details power supply, working/storage environment, dimensions, mass, and power consumption.
Quick Reference Guide
Front Panel Overview
Overview and diagram of the instrument's front panel controls and display.
Introduction of Keys
Explanation of the various keys on the instrument panel and their functions, including power, navigation, and function keys.
Rear Panel Introduction
Details the connectors and ports located on the rear panel of the instrument.
User Interface Navigation
Overview of the instrument's user interface, including measurement display, setting, and list scanning interfaces.
Basic Function Operation
Startup and Shutdown Procedures
Step-by-step instructions for turning the instrument on and off.
Parameter Selection Guide
Comprehensive guide to selecting measurement parameters like frequency, level, offset, range, impedance, and comparator settings.
Measurement Modes
Details on specific measurement modes like DCR, Electrolytic Capacitor, and Relative Function.
Data Management and Correction
Features for data retention, recording (max/min/avg), and calibration correction functions.
System Settings Configuration
Configuration options for backlight brightness, power-on parameters, and buzzer settings.
Basic Performance Indicators
Measurement Parameters Defined
Defines main and secondary measurement parameters and their combinations.
Equivalent Circuit Modes
Explains series and parallel equivalent circuit modes for component measurement.
Basic Accuracy Specifications
Details the conditions and accuracy specifications for measurements.
External Interface Instructions
USB Interface
Information on connecting and communicating with the instrument via USB.
RS232 Interface Details
Details on the RS232 connector, pin definition, and communication.
Precautions and Warranty Information
Packaging Guidelines
Describes the standard packaging methods for the instrument and accessories.
Transportation Safety
Guidelines for safe transportation of the measuring instrument.
Storage Conditions
Recommended conditions for storing the instrument to maintain its integrity.
Warranty Terms and Service
Information regarding the instrument's warranty coverage and service.
Need help?
Do you have a question about the ET4502 and is the answer not in the manual?
Questions and answers