Related Manuals for adstec OPC7022
Summarization of Contents
Notes
General remark
Explains the purpose, readership, and safe handling of the instruction manual for efficient use.
Limitation of liability
Outlines ADS-TEC's liability for improper use, unauthorized alterations, or failure to observe maintenance.
Manufacturer
Identifies ads-tec Industrial IT GmbH as the manufacturer of the product.
Relevant device documentation
Lists related documents and the manufacturer's website for additional information and downloads.
Safety instructions
Structure of safety instructions
Explains how safety instructions are presented with signal words and arrows for hazard identification and prevention.
Graduation of risk level
States that signal words classify the hazard level and guide preventative measures for user safety.
Explanation of used symbols
Defines DANGER, WARNING, CAUTION, ATTENTION symbols and "Recommendation for use" indicators.
Symbols
Explains symbols for battery disposal, WEEE compliance, protective earth connection, and hot surface warnings.
Data, figures and modifications
Disclaimer regarding accuracy, completeness, and potential changes in data and figures without liability.
Trademarks
Acknowledges software/hardware trademarks and ADS-TEC's registered trademarks, respecting protection rights.
Copyright
States copyright protection for the manual and grants limited usage rights, requiring consent for modification.
Environmental conditions
Details operating temperature, humidity, vibration, and shock resistance for different OPC models.
Operating and safety instructions
General information
Outlines manual access, qualified personnel, safety notices, and proper handling for safe operation.
Operating location
Specifies suitable environments like switching cabinets and prohibits use in non-specified areas for optimal performance.
Damage due to improper use
Instructs to shut down and secure the device if signs of damage from improper use are evident.
Warranty / repairs
States that repairs during the warranty period must be performed by authorized personnel only.
Intended use
Defines the purpose of Panel PCs for control and monitoring of machines and equipment within specifications.
Improper use
Defines improper use and states ADS-TEC's non-liability for resulting damages or injuries from misuse.
Treatment and disposal of lithium batteries
Provides safety warnings and instructions for handling and disposing of lithium batteries, emphasizing correct types and polarity.
Safety instructions for electrostatic discharge
Warns about damage from electrostatic discharge and requires safe conditions for all installation and service work.
Installation
Installation option
Discusses rear accessibility, wall thickness, and IP65 rating requirements for proper installation.
External device dimensions OPC7008
Shows external dimensions of the OPC7008 model with diagrams for installation planning.
Installation cut-out dimensions OPC7008
Provides cut-out dimensions for the OPC7008 model for panel mounting.
External device dimensions OPC7013
Shows external dimensions of the OPC7013 model with diagrams for installation planning.
Installation cut-out dimensions OPC7013
Provides cut-out dimensions for the OPC7013 model for panel mounting.
External device dimensions OPC7015
Shows external dimensions of the OPC7015 model with diagrams for installation planning.
Installation cut-out dimensions OPC7015
Provides cut-out dimensions for the OPC7015 model for panel mounting.
External device dimensions OPC7022
Shows external dimensions of the OPC7022 model with diagrams for installation planning.
Installation cut-out dimensions OPC7022
Provides cut-out dimensions for the OPC7022 model for panel mounting.
Safety notices prior to installation
Warns about grub screw protrusion and incorrect screwing during installation to prevent device damage.
Order of installation OPC7008
Details the procedure for installing the OPC7008, including screw torque and tensioner operation.
Order of installation OPC7013-7022
Details installation for OPC7013-7022, including mounting cut-out and tensioner procedures.
Commissioning
Safety warnings for commissioning
Crucial safety warning to disconnect cables and power only when the device is off before commissioning.
Commissioning information
Details about data cable shielding (EMC), enabling interfaces for embedded OS, and connection order.
Available Interfaces OPC7008
Lists and illustrates the interfaces available on the OPC7008 model for connection and setup.
Available interfaces OPC7013-7022
Lists and illustrates interfaces for OPC7013-7022 (Variants 1 and 2) for connection.
Cable installation
Specifies the location of interfaces and power supply plug at the bottom of the device.
Order of steps during commissioning
Provides a step-by-step guide for connecting cables and ensuring operational readiness.
Check for operational readiness
Instructs to check for damages after transport or improper handling before operation.
Operation
Front panel operation keys
Explains the functions of the front panel keys (ABC, Num, >>, Fn) and their assignments in basic operation.
Soft keyboard
Explains the soft keyboard functionality, its use via touch screen, and installation requirements.
Touch screen functionality
Details the touch screen monitor's functionality and driver availability integrated with the operating system.
Status displays (SYS LED)
Explains the meaning of the SYS LED indications (off, green, yellow) for device status during operation.
Interfaces
Voltage supply 24V DC
Describes the 24V DC power supply connection via a lead-through terminal and its technical data.
USB connections
Details USB 2.0 and USB 3.0 connection pinouts for peripheral connectivity.
Network connection RJ45
Explains RJ45 Ethernet connection for 10/100/1000Mbit networks and driver requirements.
Serial interface COM RS232
Details the RS232 serial interface connection, pinout, and its non-isolated nature for data transmission.
Drives
Hard disk and Flash SSD options
Lists available storage options, including 2.5" HDD SATA, 2.5" SSD SATA, and mSATA SSD.
External drives connectivity
Explains connecting external storage media via USB and warns about potential data loss during operation.
Software
Operating system installation
Guides through the process of installing the operating system via USB interface as there's no CD drive.
Configuration Center
Introduces the Configuration Center software module for device-specific settings and provides link for manual.
Service & support
ADS-TEC support contact
Provides contact information (phone, fax, email) for the ADS-TEC support team for inquiries.
Company address and general contact
Lists the company's mailing address and general contact details for inquiries.
Component replacement
Safety warnings for component replacement
Safety warning to disconnect all cables and ensure no voltage is connected before any component replacement.
Opening service slot OPC7008
Instructions on how to remove the four screws to open the service slot on the OPC7008 model.
Opening service slot OPC7013-7022
Instructions on opening the service slot for OPC7013-7022 models using a Tx 10 screwdriver.
Replacing the lithium battery
Detailed steps for loosening, removing, installing, and replacing the lithium battery safely.
Replacing the HDD (hard disk)
Instructions for removing and installing the HDD using an extraction aid, ensuring proper seating.
Replacing the fan
Steps for removing the fan cable, unscrewing, and replacing the fan with a new one.
Replacing the working memory (RAM)
Instructions for releasing and installing new RAM memory modules by engaging retaining clips correctly.
Replacing the mSATA modules
Information and steps for removing the HDD and installing/replacing mSATA modules.
Need help?
Do you have a question about the OPC7022 and is the answer not in the manual?
Questions and answers