Related Manuals for CLIVET AQUA SWAN 300S
Summarization of Contents
General Instructions
Safety Warnings and Hazards
Details critical safety warnings, hazards, and risk situations for user and unit protection.
Intended Use and General Precautions
Specifies the intended application of the unit and outlines general precautions for operation and maintenance.
Hydraulic and Electrical System Requirements
Outlines requirements for hydraulic system quality, pipe connections, and electrical system design and safety.
Signal Lines, Modifications, and Breakdowns
Covers guidelines for signal lines, unit modifications, breakdown handling, user training, and data updates.
Residual Risks and Disposal
Understanding Residual Risks
Identifies potential risks associated with unit operation, handling, installation, and components.
Disconnection and Disposal Procedures
Provides instructions for safe disconnection of the unit and environmentally compliant disposal according to CE WEEE directive.
General Unit Information
Unit Identification and Data
Details how to identify the unit using its serial number label and what information to provide for assistance.
Installation Preliminaries and Tools
Outlines preliminary checks, recommended tools, and prerequisites before initiating unit installation and start-up.
Unit Reception and Handling
Delivery Inspection Procedures
Specifies procedures for inspecting the delivered unit for transport damage and verifying contents against documentation.
Safe Handling and Transport Guidelines
Provides essential guidelines for safely handling, lifting, and transporting the unit to prevent injury or damage.
Packaging Removal Instructions
Details the steps for safely removing packaging material from the unit.
Unit Positioning and Installation
Installation Site Requirements
Defines the necessary criteria for selecting an appropriate installation site, considering space, environment, and noise levels.
Sound Emission Considerations
Addresses considerations for sound emissions and their potential impact on the surrounding environment.
Installation Space and Clearances
Specifies required installation space, internal clearances, and considerations for enclosed areas.
Electrical Outlet and Condensate Drain
Details the correct installation height for the electrical outlet and requirements for the condensate drain system.
Water Connections and Features
Water Quality and Pipe Connections
Outlines essential water quality parameters and specifies suitable materials for pipe connections.
Required Water Components
Lists mandatory water system components like filters, pressure reducers, expansion vessels, and safety valves.
Hydraulic Connection Details
Illustrates the unit's hydraulic connections, including water inlets, outlets, and drain points.
Water System Piping Diagrams (190-300)
Presents plumbing diagrams illustrating the water system piping for the 190-300 model series.
Water System Piping Diagrams (190S-300S)
Presents plumbing diagrams illustrating the water system piping for the 190S-300S model series.
Aeraulic Connections and Design
Aeraulic Design Criteria and Ducting
Defines criteria for aeraulic connection design and provides guidelines for air duct installation and minimum distances.
Dimensioning and Grille Connections
Details unit dimensions and requirements for external air return and exhaust grilles.
Air Filter Installation and Ducting Tips
Explains the correct installation of air filters and provides tips for proper duct orientation to prevent condensate issues.
Indoor Installation and Ducting Types
Recommends indoor installation locations and describes different types of intake and expulsion ducting configurations.
Electrical Connections and Wiring
Wiring Diagram for 190L Model
Provides the detailed electrical wiring diagram specific to the 190L unit model.
Wiring Diagram for 300L Model
Provides the detailed electrical wiring diagram specific to the 300L unit model.
PCB I/O Ports Description
Details the function and description of each Input/Output (I/O) port on the unit's Printed Circuit Board (PCB).
Electric Connection and Switch Settings
Explains safe electrical connection procedures, earthing requirements, and how to configure unit settings via switches.
Unit Start-Up Procedures
Pre-Start-Up Checks and System Circuits
Outlines essential pre-start-up checks and verifies the integrity of refrigerant, hydraulic, aeraulic, and electrical circuits.
Voltage and Absorption Verification
Details the process for verifying supply voltage and electrical absorption values before unit operation.
General Start-Up and Preliminary Checklist
Provides general start-up instructions and a comprehensive checklist for preliminary checks before unit activation.
Post Installation Review and Checks
Lists crucial checks to perform after installation, including user interface understanding and component verification.
Trial Running and Commissioning Checks
Guides through the trial running process and essential checks required before final commissioning of the unit.
Unit Operation and Display Overview
Explains the basic operation modes and how to interpret information displayed on the unit's screen.
Automatic Heat Source Selection and Controls
Describes automatic heat source selection, temperature controls (TCO/ATCO), and defrosting mechanisms for efficient operation.
Basic Functions and Query
Explains basic unit functions, including temperature setting, vacation mode, and how to query operational parameters.
Starting Report Data Collection
Details the importance of collecting operational data during start-up for performance monitoring and future reference.
Unit Control and Display
Display Interface and Icons
Explains the unit's display interface, including the layout, buttons, and status indicator icons.
Control Modes: Solar, Vacation, Compressor, E-Heater
Details how to operate and interpret the status of key control modes like solar integration, vacation, compressor, and electric heater.
Control Modes: Disinfect and Alarms
Explains the disinfect mode, alarm indicators, unit locking, and temperature unit settings.
Setting Water Temp, Date, and Timers
Guides on setting water temperature, vacation days, programming timers, and configuring the unit's clock.
Manual E-Heater Operation
Provides step-by-step instructions for manually activating or deactivating the electric heater (E-heater) function.
Navigating Controls: Increase/Decrease
Explains how to adjust values and navigate through settings using the up and down control buttons.
Setting Clock and Timers
Details the procedures for setting the unit's internal clock and configuring scheduled timer operations.
Managing Timers: Cancel and Check
Describes how to cancel existing timer settings and how to check programmed timer schedules.
Unit Start-Up/Shutdown and Navigation
Explains how to start up and shut down the unit, enter settings, and unlock the control panel.
Disinfect Function Operation
Guides on manually activating the anti-legionella disinfection function and setting its schedule.
Vacation Mode Settings
Details how to set and activate the vacation mode for energy saving during periods of non-use.
Button Combinations: Error Clearing and Diagnostics
Explains how to clear error codes and access diagnostic functions using button combinations.
Auto-Restart, Button Lock, and Screen Lock
Describes features like auto-restart after power failure, button auto-locking, and screen auto-lock for security.
Self-Protection and Troubleshooting
Explains unit self-protection mechanisms and provides basic troubleshooting steps for common errors.
Alarm Codes and Descriptions (E0-EF)
Lists and describes various alarm codes, their potential causes, and suggested solutions for unit issues.
Alarm Codes and Descriptions (P1-LA)
Continues the list of alarm codes, detailing protection errors, their causes, and required actions.
Non-Error Operational Tips and FAQs
Addresses common operational questions and provides tips for normal unit behavior not related to errors.
Unit Maintenance Procedures
Recommended Regular Maintenance Checklist
Outlines a checklist of recommended regular checks for maintaining unit performance and longevity.
General Maintenance Guidelines
Provides general principles for maintenance, inspection frequency, and maintaining a unit service log.
Storage, Coil, Structure, and Safety Valve Checks
Details maintenance checks for the coil, unit structure, safety valve, and procedures for putting the unit into storage.
Expansion Tank and Anode Rod Maintenance
Explains how to check and maintain the expansion tank and replace the magnesium anode rod for corrosion protection.
Tank Emptying and Restart Procedures
Provides instructions for safely emptying the storage tank and restarting the unit after a long period of inactivity.
Air Filter Cleaning
Details the importance and procedure for cleaning the air filter to ensure optimal unit performance.
Electric Heater Replacement
Guides on how to replace or control the electric heater element within the unit.
Condensate Discharge Maintenance
Explains the importance of maintaining the condensate discharge system to prevent blockages and microbial growth.
Technical Data and Specifications
Dimensional Data (190 / 190S)
Provides detailed dimensional specifications and connection points for the AQUA 190 and 190S models.
Dimensional Data (300 / 300S)
Provides detailed dimensional specifications and connection points for the AQUA 300 and 300S models.
Power, Efficiency, and ErP Ratings
Lists technical data related to power consumption, efficiency ratings (ErP), and performance metrics.
Accumulator and Refrigerant Circuit Specs
Details specifications for the domestic hot water accumulator, refrigerant type, and circuit components.
Ventilation, Solar, and Electrical Data
Presents technical data related to ventilation, solar capabilities, and electrical characteristics of the unit.
Operating Limits for Heat Pump and Heater
Defines the operational limits for the heat pump and electric heating element based on ambient and water temperatures.
EU Declaration of Conformity
EU Declaration of Conformity Details
Contains the EU Declaration of Conformity, listing relevant directives and standards the machine complies with.
Need help?
Do you have a question about the AQUA SWAN 300S and is the answer not in the manual?
Questions and answers