Graco Merkur LW125A Repair And Parts Manual

Displacement pump

Repair/Parts

Merkur

Displacement Pump

For use with high-performance finishing and coating pumps in hazardous and

non-hazardous locations. For professional use only.

Important Safety Instructions

Read all warnings and instructions in this manual.

For complete warnings and instructions see your

pump or package manual. Hazard symbols refer to

specific procedure risks. Save all instructions.

See page 3 for model information, including maximum working pressures.

LW025A

TI11643a

LW150A

312792F

ENG

TI11645

Table of Contents

Need help?

Do you have a question about the Merkur LW125A and is the answer not in the manual?

Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing.

Follow all warnings and instructions in your pump manual for the following preliminary steps: Flush the equipment, relieve pressure, remove pump.

Lay out all removed parts in sequence to ease reassembly. Clean all parts with a compatible solvent and inspect them for wear or damage.