Carrier Puron R-410A Service And Maintenance Instructions

Carrier Puron R-410A Service And Maintenance Instructions

Single package rooftop electric cooling units with optional electric heat with refrigerant
Table of Contents

Advertisement

Service and Maintenance Instructions
CONTENTS
SAFETY CONSIDERATIONS . . . . . . . . . . . . . . . . . . . . 1
UNIT ARRANGEMENT AND ACCESS. . . . . . . . . . . . . 2
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Seasonal Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . 3
SUPPLY FAN (BLOWER) SECTION . . . . . . . . . . . . . . 4
Supply Fan (Belt-Drive) . . . . . . . . . . . . . . . . . . . . . . . . 4
COOLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Condenser Coil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Recommendation. . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Evaporator Coil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PURON® (R-410A) REFRIGERANT. . . . . . . . . . . . . . 11
Refrigerant Charge. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Filter Drier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Condenser Fan Adjustment . . . . . . . . . . . . . . . . . . . 17
CONVENIENCE OUTLETS . . . . . . . . . . . . . . . . . . . . . 18
Non-Powered Type. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Unit-Powered Type. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Duty Cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Fuse on Powered Type . . . . . . . . . . . . . . . . . . . . . . . 19
SMOKE DETECTORS . . . . . . . . . . . . . . . . . . . . . . . . . 19
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Smoke Detector Locations . . . . . . . . . . . . . . . . . . . . 20
Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Sensor and Controller Tests . . . . . . . . . . . . . . . . . . . 22
PROTECTIVE DEVICES . . . . . . . . . . . . . . . . . . . . . . . 25
Compressor Protection . . . . . . . . . . . . . . . . . . . . . . . 25
Relief Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Control Circuit, 24-v . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ELECTRIC HEATERS . . . . . . . . . . . . . . . . . . . . . . . . . 25
Completing Heater Installation . . . . . . . . . . . . . . . . . 27
OPTION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
RTU-OPEN CONTROL SYSTEM . . . . . . . . . . . . . . . . 27
ECONOMIZER SYSTEMS. . . . . . . . . . . . . . . . . . . . . . 28
EconoMi$er IV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Economi$er® X (Factory Option) . . . . . . . . . . . . . . . 38
WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No. 04-53500223-01
Electric Cooling Units with Optional Electric Heat
Printed in U.S.A.
Form 50KC-4-6-01SM
Single Package Rooftop
with Puron
®
PRE-START-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
START-UP, GENERAL . . . . . . . . . . . . . . . . . . . . . . . .52
Unit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Return-Air Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Outdoor-Air Inlet Screens . . . . . . . . . . . . . . . . . . . . .52
Compressor Mounting . . . . . . . . . . . . . . . . . . . . . . . .52
Internal Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Refrigerant Service Ports. . . . . . . . . . . . . . . . . . . . . .52
Compressor Rotation . . . . . . . . . . . . . . . . . . . . . . . . .52
Cooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Heating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Ventilation (Continuous Fan). . . . . . . . . . . . . . . . . . .53
START-UP, PREMIERLINK CONTROLS . . . . . . . . . .53
START-UP, RTU-OPEN CONTROL . . . . . . . . . . . . . .53
OPERATING SEQUENCE . . . . . . . . . . . . . . . . . . . . . .53
Base Unit Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Cooling - Units without Economizer . . . . . . . . . . . . .53
Heating - Units without Economizer . . . . . . . . . . . . .53
Cooling, Unit with EconoMi$er IV . . . . . . . . . . . . . . .53
Heating, Unit with EconoMi$er IV . . . . . . . . . . . . . . .53
Demand Controlled Ventilation . . . . . . . . . . . . . . . . .53
FASTENER TORQUE VALUES. . . . . . . . . . . . . . . . . .54
APPENDIX B - PHYSICAL DATA . . . . . . . . . . . . . . .57
APPENDIX C - FAN PERFORMANCE . . . . . . . . . . .59
APPENDIX D - ELECTRICAL DATA. . . . . . . . . . . . .67
APPENDIX E - WIRING DIAGRAMS. . . . . . . . . . . . .75
APPENDIX F - MOTORMASTER SENSOR
LOCATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
START-UP CHECKLIST . . . . . . . . . . . . . . . . . . . . .CL-1

SAFETY CONSIDERATIONS

Improper
installation,
maintenance, or use can cause explosion, fire, electrical shock
or other conditions which may cause personal injury or
property damage. Consult a qualified installer, service agency,
or your distributor or branch for information or assistance. The
qualified installer or agency must use factory-authorized kits or
accessories when modifying this product. Refer to the
individual instructions packaged with the kits or accessories
when installing.
Follow all safety codes. Wear safety glasses and work gloves.
Use quenching cloths for brazing operations and have a fire
extinguisher available. Read these instructions thoroughly and
follow all warnings or cautions attached to the unit. Consult
local building codes and appropriate national electrical codes
(in USA, ANSI/NFPA70, National Electrical Code (NEC); in
Canada, CSA C22.1) for special requirements.
It is important to recognize safety information. This is the
safety-alert symbol
. When you see this symbol on the unit
and in instructions or manuals, be alert to the potential for
personal injury.
Pg 1
50KC04-06
(R-410A) Refrigerant
adjustment,
alteration,
2-19
Replaces: NEW
service,

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Puron R-410A and is the answer not in the manual?

Questions and answers

Summarization of Contents

SAFETY CONSIDERATIONS
SAFETY CONSIDERATIONS
General safety precautions and warnings for installation, adjustment, service, and maintenance.
UNIT ARRANGEMENT AND ACCESS
General
Shows general unit arrangement and access locations.
Routine Maintenance
Routine Maintenance
Items to be checked monthly or bi-monthly for routine maintenance.
Seasonal Maintenance
AIR CONDITIONING
Maintenance tasks related to the air conditioning system.
HEATING
Maintenance tasks related to the heating system.
ECONOMIZER OR OUTSIDE AIR DAMPER
Maintenance for economizer or outside air damper components.
AIR FILTERS AND SCREENS
Procedures for cleaning and replacing air filters and screens.
SUPPLY FAN (BLOWER) SECTION
Supply Fan (Belt-Drive)
Details on the belt-drive supply fan system and its components.
COOLING
Condenser Coil
Information on the condenser coil construction and materials.
Condenser Coil Maintenance and Cleaning Recommendation
Recommended procedures for routine condenser coil cleaning.
Evaporator Coil
CLEANING THE EVAPORATOR COIL
Instructions for cleaning the evaporator coil.
EVAPORATOR COIL METERING DEVICES
Information on metering devices for the evaporator coil.
Refrigerant System Pressure Access Ports
Refrigerant System Pressure Access Ports
Description and diagram of refrigerant system pressure access ports.
PURON® (R-410A) REFRIGERANT
Refrigerant Charge
Information on the correct amount and procedure for refrigerant charging.
Compressor
Details on compressor lubrication and oil type.
CONVENIENCE OUTLETS
Unit-Powered Type
Details on the unit-mounted transformer for convenience outlets.
SMOKE DETECTORS
System
Description of the smoke detector system components and function.
Controller
Details on the smoke detector controller assembly.
Sensor
Description of the smoke detector sensor assembly.
Smoke Detector Locations
SUPPLY AIR
Location of the supply air smoke detector sensor.
RETURN AIR WITHOUT ECONOMIZER
Location of the return air smoke detector sensor without economizer.
RETURN AIR WITH ECONOMIZER
Location of the return air smoke detector sensor with economizer.
Sensor and Controller Tests
Sensor Alarm Test
Procedure to test the sensor's ability to signal an alarm state.
Controller Alarm Test
Procedure to test the controller's ability to indicate an alarm state.
Dirty Controller Test
Procedure to test the controller's ability to indicate a dirty sensor test.
Dirty Sensor Test
Procedure to test the sensor's ability to compensate for environmental changes.
INDICATORS
Normal State
Indicator status in normal operating conditions.
Alarm State
Indicator status when the detector enters alarm state.
DETECTOR CLEANING
Cleaning the Smoke Detector
Procedure for cleaning the duct smoke sensor when Dirty LED is flashing.
TROUBLESHOOTING
Controller's Trouble LED is On
Troubleshooting steps when the controller's Trouble LED is on.
Controller's Trouble LED is Flashing
Troubleshooting steps when the controller's Trouble LED is flashing.
Sensor's Trouble LED is On
Troubleshooting steps when the sensor's Trouble LED is on.
Sensor's Power LED is Off
Troubleshooting steps when the sensor's Power LED is off.
Controller's Power LED is Off
Troubleshooting steps when the controller's Power LED is off.
Remote Test/Reset Station's Trouble LED Does Not Flash When Performing a Dirty Test, But the Controller's Trouble LED Does
Troubleshooting when remote station Trouble LED doesn't flash but controller's does.
Sensor's Trouble LED is On, But the Controller's Trouble LED is OFF
Troubleshooting when sensor's Trouble LED is on but controller's is off.
PROTECTIVE DEVICES
Compressor Protection
Information on compressor overcurrent and overtemperature protection.
HIGH PRESSURE SWITCH
Details on the high pressure switch function and trip settings.
LOW PRESSURE SWITCH
Details on the low pressure switch function and trip settings.
EVAPORATOR FREEZE PROTECTION
Information on evaporator coil freeze protection.
SUPPLY (INDOOR) FAN MOTOR PROTECTION
Details on supply fan motor internal overcurrent and overtemperature protection.
CONDENSER FAN MOTOR PROTECTION
Information on condenser fan motor internal overtemperature protection.
Relief Device
Description of the pressure relief device.
Control Circuit, 24-v
Details on the 24-v control circuit protection.
ELECTRIC HEATERS
Information on accessory electric heaters and their installation.
Completing Heater Installation
FIELD POWER CONNECTIONS
Field-supplied tap conductor installation between lugs and single point box.
LOW-VOLTAGE CONTROL CONNECTIONS
Connecting low-voltage control leads from heater modules to terminal board.
ECONOMIZER SYSTEMS
WIRING HARNESS
Diagram showing economizer wiring harness connections.
EconoMi$er IV
ECONOMISER IV STANDARD SENSORS
Information on standard sensors used with the EconoMi$er IV.
Outdoor Air Temperature (OAT) Sensor
Details on the outdoor air temperature sensor.
Supply Air Temperature (SAT) Sensor
Details on the supply air temperature sensor.
CHECKOUT
Initial Menu Display
Description of the initial display upon powering up the W7220.
Status
Using the Status menu to check parameter values for devices and sensors.
Checkout Tests
Performing checkout tests for damper operation and outputs.
TROUBLESHOOTING
Alarms
Economizer module alarm messages displayed on the LCD.
Clearing Alarms
Procedure to clear alarm messages from the display.
APPENDIX D - ELECTRICAL DATA
Table P — 50KC**04 (3 Tons) Cooling
Electrical data for 3-ton cooling models.
Table Q — 50KC**05 (4 Tons) Cooling
Electrical data for 4-ton cooling models.
APPENDIX E - WIRING DIAGRAMS
Table Y - Wiring Diagrams
Index of wiring diagram drawing numbers and page references.
START-UP CHECKLIST
I. PRELIMINARY INFORMATION
Basic job and unit identification details.
II. PRE-START-UP
Pre-start checks before energizing the unit.
III. START-UP
Electrical and temperature readings during initial start-up.
PRESSURES (Cooling Mode)
Refrigerant pressure readings during cooling mode operation.
GENERAL
General checks for economizer and smoke detector.
IV. HUMIDI-MIZER® START-UP
Specific start-up steps for Humidi-Mizer equipped units.

Table of Contents