Table of Contents
Advertisement
EoSens CL Camera Manual
HighSensitivity HighSpeed CMOS Camera
EoSens CL Camera Manual
Camera-Firmware:
Camera ID:
Copyright © 2008 Mikrotron GmbH
Mikrotron GmbH
Landshuter Str. 20-22
D-85716 Unterschleissheim
Germany
Rev. 1.04
B2.02-V1.04-F1.04
MC1360-63
Tel.: +49 89 726342 00
Fax: +49 89 726342 99
info@mikrotron.de
www.mikrotron.de
Advertisement
Table of Contents
Related Manuals for Mikrotron MC1362
Summarization of Contents
1 General
1.1 Regulatory Compliance
FCC and Canadian radio noise emission compliance information.
1.5 Declaration of Conformity
Statement of compliance with EU directives and relevant standards.
1.6 Warranty and Warnings
Warranty conditions and important remarks or warnings for users.
2 Introduction
2.1 Top Level Specifications
Overview of key technical features and capabilities of the EoSens camera.
2.2 Electronic "Freeze Frame" Shutter
Explanation of the camera's electronic shutter mechanism and its operation.
2.3 Camera Type Differences
Comparison of different EoSens camera models based on features.
3 Hardware
3.1 Camera Link Interface
Details on the Camera Link interface for data transfer.
3.2 Power Supply
Specifications and warnings related to the camera's power supply.
3.3 Status LED
Explanation of the dual-color status LED indicators on the camera.
4 Getting Started
4.1 First Steps
Initial setup procedure including connecting cables and installing the lens.
5 Initial Setup
5.1 Serial Number & Firmware Revision
How to read the camera's serial number and firmware version.
5.4 Factory & User Profiles
Details on pre-configured factory and custom user profiles.
5.6 PowerUpProfile
Description of the PowerUpProfile for camera register loading.
6 Configuration
6.1 Command Reference
Detailed list and description of camera configuration commands.
6.2 Camera Information and Profiles
Retrieving camera data and managing profiles (user, factory, power-up).
6.4 Output Mode and 6.5 Image Quality
Configuring output modes, gain, blacklevel, and FPN correction.
6.6 Image Size and Position
Defining Region of Interest (ROI) and related parameters.
6.7-6.8 Exposure and Timing Control
Controls framerate, shutter time, and various exposure modes.
6.9 Other Commands
Miscellaneous commands for testing, error retrieval, and system resets.
6.10 Firmware Management
Procedures for updating microcontroller and FPGA firmware.
8 Technical Data
8.1 Overview and Sensor Specs
General camera overview and detailed sensor defect specifications.
8.3 Spectral Response
Graph showing the camera's spectral response across different wavelengths.
8.4-8.7 Connectors, Timing, and Dimensions
Details on connectors, bit assignments, timing diagrams, and mechanical dimensions.
Need help?
Do you have a question about the MC1362 and is the answer not in the manual?
Questions and answers