Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Torbal AGCN220
Summarization of Contents
Cautionary Notes and Warnings
CAUTIONARY NOTES AND PRECAUTIONS
General precautions and advice for safe operation and optimal placement of the scale.
Keys, Display Indicators and Commands
Key Functions
Details the primary and secondary functions of each key on the scale's keypad.
Display Indicators
Explains the meaning of various indicators shown on the scale's display during operation.
Mode Indicators
Lists main menu functions and corresponding scale modes and their indicators.
Commands and Abbreviations
Lists commands or abbreviations used by the scale and their descriptions.
Calibration
7.1 Calibration - Automatic Internal
Details the process and conditions for automatic internal calibration on AGCN models.
7.2 Calibration – External
Explains how to perform external calibration using calibration weights for AGZN models.
Mode Configuration
9.1 Animal Weighing Configuration
Configures the scale for weighing live animals, including modes and time intervals.
9.2 Parts Counting Configuration
Sets up the scale for counting items based on their average piece weight.
9.3 Check Weighing Configuration
Configures the scale for comparing weights against set upper and lower limits.
9.4 Display Hold Configuration
Configures the scale to lock the weight reading on the display after removal.
9.5 Percent Weighing Configuration
Sets up the scale to compare item weight relative to a stored sample.
9.6 Totalizing Configuration
Configures the scale to sum multiple recorded weights sequentially.
9.7 Density Measurement Configuration
Sets up the scale for calculating density of solids and liquids with a density kit.
9.7.1 Solid
Configuration steps for density measurement of solid objects.
9.7.2 Liquid
Configuration steps for density measurement of liquid objects.
Printing Data and Communication Ports
USB and RS232 Ports
Details configuration options for USB and RS232 communication ports on the scale.
12.1 Baud Rate
Instructions for setting the baud rate for data communication.
12.2 Bits
Configuration for the number of data bits in communication settings.
12.3 Parity
Configuration for parity type in data communication.
12.4 Send – Sending Data to PC or Printer
Configures data sending format for PC or printer output.
12.5 Installing Drivers
Guide on how to install necessary drivers for PC connection via USB.
12.6 Data Transmission and Exchange Protocol
Explains the data transmission parameters and exchange protocol used by the scale.
Weighing
15.1 Zeroing the Scale
Instructions on how to re-zero the scale manually or using AZSM.
15.2 Taring the Scale
Guide on how to tare the scale to subtract container or gross weight.
15.3 Clearing the Tare
Instructions on how to clear a previously set tare value.
Density Measurement
22.1 Solid
Procedure for measuring the density of solid objects using the scale.
22.2 Liquid
Procedure for measuring the density of liquid objects using the scale.
Need help?
Do you have a question about the AGCN220 and is the answer not in the manual?
Questions and answers