Advertisement
Parts Counting
Before using this reference guide, enable and configure Parts Counting by following the steps listed in Chapter 7.1.3 of
the Instruction Manual. To enter the Parts Counting mode press the "Function" key, and select the function by pressing
the "T" key while "Parts" is displayed.
1. Place a container on the pan and tare it by pressing the "T' key.
2. Confirm the sample size by pressing the "T (Yes)" key.
3. Manually count out the sample and place it in the container located on the pan.
AGC Series: Quick Reference Guide
1
Advertisement
Table of Contents
Related Manuals for Torbal AGC Series
Summary of Contents for Torbal AGC Series
- Page 1 AGC Series: Quick Reference Guide Parts Counting Before using this reference guide, enable and configure Parts Counting by following the steps listed in Chapter 7.1.3 of the Instruction Manual. To enter the Parts Counting mode press the “Function” key, and select the function by pressing the “T”...
- Page 2 AGC Series: Quick Reference Guide 4. Press the “T (YES)” key to confirm and accept the sample weight. 5. Begin to fill the remainder of the pieces. For a detailed description of this feature please turn to Chapter 8(B) of the instruction manual.
Need help?
Do you have a question about the AGC Series and is the answer not in the manual?
Questions and answers