Advertisement
Animal Weighing
Before using this reference guide, enable and configure Animal Weighing by following the steps listed in Chapter 7.1.3
of the Instruction Manual. To enter the Animal Weighing mode press the "Function" key, and select the function by
pressing the "T" key while "Animal" is displayed.
1. Place a container on the pan and tare it by pressing the "T' key.
2. Place the animal into the container.
3. The scale will count down a time interval.
AGC Series: Quick Reference Guide
Automatic and Semi Automatic
modes
Animal Weighing will begin
automatically.
Manual mode
Press the "Function" key to initialize
Animal Weighing.
1
Advertisement
Table of Contents
Related Manuals for Torbal AGC Series
Summary of Contents for Torbal AGC Series
- Page 1 AGC Series: Quick Reference Guide Animal Weighing Before using this reference guide, enable and configure Animal Weighing by following the steps listed in Chapter 7.1.3 of the Instruction Manual. To enter the Animal Weighing mode press the “Function” key, and select the function by pressing the “T”...
- Page 2 AGC Series: Quick Reference Guide 4. After the time interval has elapsed the result will be displayed. 5. The animal can be removed from the pan Automatic mode: Result will be automatically cleared; the scale will perform an automatic tare.
Need help?
Do you have a question about the AGC Series and is the answer not in the manual?
Questions and answers