Table of Contents
Advertisement
Instructions/Parts
®
NXT
Air Motor
For use with high performance finishing and coating pumps in hazardous or
non-hazardous locations. For professional use only.
Models M02xxx, M04xxx, M07xxx, M12xxx, M18xxx, and M34xxx
100 psi (0.7 MPA, 7.0 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this
manual. For complete warnings and
instructions see your pump or package
manual. Hazard symbols refer to specific
procedure risks. Save all instructions.
See page 3 for model information.
312796S
EN
ti11838a
Advertisement
Table of Contents
Related Manuals for Graco NXT Air Motor M18LN0
Summarization of Contents
Warnings
FIRE AND EXPLOSION HAZARD
General safety warning about flammable fumes.
EQUIPMENT MISUSE HAZARD
Risks associated with improper use of equipment.
SKIN INJECTION HAZARD
Danger of high-pressure fluid piercing skin.
PRESSURIZED EQUIPMENT HAZARD
Risk of fluid splash from pressurized components.
MOVING PARTS HAZARD
Danger of injury from moving mechanical parts.
PERSONAL PROTECTIVE EQUIPMENT
Mandatory protective gear for safe operation and servicing.
Component Identification
Key
Lists and describes components of the NXT Air Motor.
Repair
Preventive Maintenance Schedule
Guidance on establishing a maintenance schedule for system operation.
Pressure Relief Procedure
Steps to safely relieve pressure before servicing.
Repair Air Valve
Instructions for repairing the air valve assembly.
Replace Pilot Valves
Procedure for replacing pilot valves in the air motor.
Repair Air Motor
General section for air motor repair procedures.
Disassemble the Air Motor
Steps to take apart the air motor for servicing.
Reassemble the Air Motor
Steps for putting the air motor back together after repair.
Need help?
Do you have a question about the NXT Air Motor M18LN0 and is the answer not in the manual?
Questions and answers