Table of Contents
Advertisement
Quick Links
8024 AND 8124 WINDLOAD
Torsion Spring
Installation Instructions and Owner's Manual
Wayne-Dalton Corp.
P.O. Box 67
Mt. Hope, OH 44660
www.wayne-dalton.com
Copyright 2009 Wayne-Dalton Corp.
IMPORTANT NOTICE!
Read these instructions carefully before
attempting installation. If in question about
any of the procedures, do not perform the
work. Instead, have a trained door systems
technician do the installation or repairs.
Part No. 335362
REV4 08/03/2009
Advertisement
Table of Contents
Related Manuals for Wayne-Dalton 8024
Summarization of Contents
Tools Required
Removing An Old Door
Procedure for safely removing an existing garage door.
Installation
Track and Bracket Setup
Installing flagangles, horizontal angles, jamb brackets, and vertical tracks.
Bottom Section and Roller Assembly
Attaching bottom brackets, U-bars, and rollers for the bottom section.
Hinge and Section Stacking
Attaching hinges and stacking door sections.
Top Bracket and Horizontal Track Attachment
Mounting top brackets and attaching horizontal tracks to flagangles.
Torsion Spring System Installation
Installing bearing brackets, center bracket, and torsion spring assembly.
Counterbalance Cable and Spring Winding
Setting up cables, drums, and winding torsion springs.
Rear Support and Final Adjustments
Installing rear supports and performing final track adjustments.
Optional Installation
Side Lock and Pull Rope
Installing optional side lock and pull rope features.
Trolley Operator Installation
Attaching and mounting the trolley operator system.
Cleaning and Painting
Garage Door Cleaning Procedures
Recommended procedures for cleaning garage door surfaces.
Surface Preparation and Painting
Guidance on preparing and painting steel and wood doors.
Need help?
Do you have a question about the 8024 and is the answer not in the manual?
Questions and answers