Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Essilor SL 450
Summarization of Contents
Introduction
General Description
Overview of the user manual's relevance and the slit lamp's basic purpose.
Instrument Classification
Details on the slit lamp's classification according to IEC 60601-1 standards.
Microscope Specifications
Technical details regarding the microscope component of the slit lamp.
Slit Illumination Specifications
Technical specifications for the slit illumination system.
Base Specifications
Technical details concerning the base unit of the slit lamp.
Chinrest Specifications
Technical specifications related to the chinrest of the slit lamp.
Power Specifications
Technical details regarding the power requirements and consumption.
Output Voltage Specifications
Specifications for the output voltage of the slit lamp's systems.
Dimension and Weight Specifications
Physical dimensions and weight details of the slit lamp.
Environmental Conditions
Recommended environmental conditions for transport, storage, and use.
Safety and Precautions
Precautions
General safety guidelines and warnings for operating the slit lamp.
Safety Marks and Symbols
Explanation of safety marks, icons, and warning symbols on the instrument.
EMC and WEE Precautions
Guidelines for electromagnetic compatibility and waste electrical equipment disposal.
Technical Specifications for Safety
Lists technical specifications relevant to safe operation and compliance.
Device Marks and Indicator Lamp
Details on marks affixed to the device and the function of the indicator lamp.
Installation, Component, and Storage Safety
Covers safe installation, component handling, and transport/storage procedures.
Nomenclature
Component Identification and Diagram
Detailed diagram and descriptions of all instrument parts and controls.
Assembly
Main Parts Check List
List of components to verify before assembling the slit lamp.
Assembly Procedure
Step-by-step guide for assembling the slit lamp instrument.
Checking Procedure
Steps to verify correct assembly and initial functionality.
Operation Procedures
Preparation for Diopter and IPD Adjustment
Steps to prepare the slit lamp for patient examination by adjusting optics.
Patient Positioning and Fixation Point Use
Guidelines for correctly positioning the patient and using the fixation point.
Base Operation (Horizontal and Vertical)
How to move and adjust the slit lamp base for alignment.
Illumination System Operation
Instructions for controlling the slit lamp's illumination features.
Tips for Operation Process
Additional advice and best practices for operating the slit lamp.
Cleaning
Cleaning Methods
Instructions on how to clean different parts of the slit lamp.
Cleaning Cycle Recommendations
Recommended frequency for cleaning various components of the instrument.
Maintenance
Protection Measures
How to protect the slit lamp from dust and damage during operation.
Adjusting Slit Width
Guide on how to adjust the slit width control knob.
Adjusting Illumination Inclination
Procedure for adjusting the inclination of the illumination part.
Fuse Replacement
Steps for safely replacing the fuse in the instrument.
Chinrest Paper Replacement
Instructions for replacing the chinrest paper for hygiene.
Consumables Identification
Information on replaceable parts like fuses and bulbs.
Appendix
Electrical Circle Drawing
Schematic diagram illustrating the electrical circuit of the slit lamp.
Need help?
Do you have a question about the SL 450 and is the answer not in the manual?
Questions and answers