Maintenance And Servicing; Inspection, Maintenance, And Cleaning; Please Read The Following Carefully - Central Hydraulics 99887 Set Up And Operating Instructions Manual

High position motorcycle lift
Table of Contents

Advertisement

MaINTENaNCE aNd
SERVICING
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
FROM aCCIdENTaL
OPERaTION:
Remove any load from the
Motorcycle Lift before
performing any inspection,
maintenance, or cleaning
procedures.
TO PREVENT SERIOuS
INjuRY FROM TOOL
FaILuRE:
do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Inspection, Maintenance, and
Cleaning
1.
BEFORE EACH USE, inspect the
general condition of the Motorcycle
Lift. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, damaged
straps, and any other condition that
may affect its safe operation.
2.
TO BLEED LIFT OF EXCESS AIR
AND FILL WITH HYDRAULIC OIL:
See "ASSEMBLY" section in this
manual for instructions.
(See pages 6 thru 7.)
SKU 99887
TO PREVENT
SERIOuS INjuRY
If the Lift fails to
operate properly
For technical questions, please call 1-800-444-3353.
after bleeding and filling with hy-
draulic oil, it MuST NOT be used
until it is serviced by a qualified
technician.
3.
AFTER USE,
surfaces of the Motorcycle Lift with a
clean cloth.
4.
WHEN STORING, make sure to store
the Motorcycle Lift in a clean, dry,
safe location out of reach of children
and other unauthorized persons.
PLEaSE REad THE
FOLLOWING CaREFuLLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED THE
PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION
OR WARRANTY OF ANY KIND TO
THE BUYER THAT HE OR SHE IS
qUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR
SHE IS qUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND
PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND
NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT
PARTS THERETO.
clean the external
Page 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents