Product Features; Operating Instructions - Central Hydraulics 99887 Set Up And Operating Instructions Manual

f. Test the Motorcycle Lift to make sure
it is functioning properly before at-
tempting to lift a load.
(See Figure G.)

PROduCT FEaTuRES

aRM LIFT RuBBER
aSSY. Pad
(13) (15)
STRaP
WITH
HOOK
(25)
SKU 99887
FIGuRE G
OIL
PLuG
(38a)
jaCK
(1)
RELEaSE
VaLVE
(23X)
FIGuRE H
HaNdLE
(18)
RELEaSE
VaLVE
(23X)
BaSE
LEG
(12)
STRaP
RELEaSE
LEVER
(24)
For technical questions, please call 1-800-444-3353.

OPERaTING INSTRuCTIONS

Read the ENTIRE IMPORTaNT
SaFETY INFORMaTION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
1. To transport the Motorcycle Lift, grasp
the Handle of the Post (19) firmly
with both hands. Lower the Lift until
the two Wheels (7) contact the floor
surface, and slowly push the unit to its
work location.
(See Figure I.)
FIGuRE I
2. Make sure the work location is a
clean, dry, oil/grease free, level, floor
surface capable of supporting the
weight of the Motorcycle Lift, its load,
and any other tools and equipment.
3. Check to make sure the Motorcycle
Lift is fully lowered. If not, turn the
Release Valve (23X) counterclock-
wise and allow the Arm Lift (13) to
lower until it contacts the floor sur-
face. Then turn the Release Valve
clockwise until it stops.
(See Figure G.)
4. Slide the Arm Lift (13) under the mo-
torcycle, making sure the Arm Lift is
WHEELS
(7)
Page 7