Specifications - Central Hydraulics 99887 Set Up And Operating Instructions Manual

5. Lift the load only by the vehicle
manufacturer's recommended lifting
points.
6. Stay out from under the load while it
is being lifted or supported.
7. Keep fingers, hands, and feet away
from the Arm Lift assembly when rais-
ing or lowering the Lift.
8. Never use the Motorcycle Lift if the
Position Pin is not engaged (locking
the Arm Lift assembly in place).
9. Do not use the Motorcycle Lift with
the vehicle's engine running. When
running, the vehicle's engine pro-
duces carbon monoxide, a color-
less, odorless, toxic fume that, when
inhaled, can cause serious personal
injury or death.
10. Always center the load directly over
the two Arm Lifts.
11. Always use the two Straps with
Hooks to secure the motorcycle/ATV
to the Lift before raising the load.
12. Do not use the Motorcycle Lift for
aircraft purposes.
13. Do not allow anyone on the vehicle
when using the Motorcycle Lift. Keep
all bystanders a safe distance away
from the vehicle.
14. This Motorcycle Lift is designed for
short term use only. Do not leave a
load on the Lift for extended periods.
15. Before lowering the Motorcycle Lift,
make sure tool trays and all other
tools and equipment are removed
from under the Lift.
16. Avoid rapid load descent. Turn the
Release Valve slowly.
SKU 99887 For technical questions, please call 1-800-444-3353.
17. Do not leave the Motorcycle Lift unat-
tended when it is under a load. Low-
er the Lift all the way before leaving.
18. This product is not a toy. Keep it out
of reach of children.
19. The warnings, precautions, and in-
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.

SPECIFICaTIONS

Maximum Lift Capacity
Maximum Lifting Height
Minimum Lifting Height
Ram Travel
Distance Between Base Legs
uNPaCKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
aSSEMBLY INSTRuCTIONS
Read the ENTIRE IMPORTaNT
SaFETY INFORMaTION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
1100 Pounds
30"
2-1/2"
7-3/8"
20-3/8"
Page 4