Banner R-GAGE Q240RA-US-AF2Q Datasheet

R-GAGE Q240RA-AF2 Sensor
™
Datasheet
Radar-Based Dual-Zone Narrow-Beam Sensors for Detection of Moving and Stationary Targets
Model
Q240RA-US-AF2Q
independent
zones; 1 to
Q240RA-CN-AF2Q
40+ meters
CAUTION: Make No Modifications to this Product
Any modifications to this product not expressly approved by Banner Engineering could void the user's
authority to operate the product. Contact Banner Engineering for more information.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Overview
The R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of this
emitted energy is reflected back to the receiving antenna. Signal processing electronics determine the distance from the
sensor to the object based on the time delay of the return signal. The sensor can be configured to two independent
sensing zones.
The two sensing zones are factory pre-set to default distances; they can be reconfigured for different distances using the
DIP switches on the side of the sensor. The sensor is plug-in ready for immediate operation.
The sensitivity is precalibrated at the factory, assuming that the sensing field will be clear of obstacles. The sensitivity can
be adjusted using the DIP switches on the side of the sensor.
Original Document
184564 Rev. A
• FMCW (true-presence) radar detects moving and stationary objects
• Narrow 11° × 13° beam pattern
• Two independent, adjustable sensing zones detect objects up to 40 meters
away (131.2 ft)
• Easy setup and configuration of range, sensitivity, and output with simple DIP
switches
• Sensing functions are unaffected by wind, falling rain or snow, fog, humidity,
air temperatures, or light
• Sensor operates in Industrial, Scientific, and Medical (ISM) telecommunication
band
• Rugged IP67 housing withstands harsh environments
Protected by US patents
Sensing Supply
Connection
Range Voltage
Two
5-pin M12
sensing 12 to 30 V
quick
disconnect
(131 ft)
22 September 2015
Telecom Approval
Telecom approved for US and Canada
dc
Telecom approved for China
Output
DIP-switch-
selectable NPN or
PNP; N.O. or N.C.
184564