Related Manuals for Thermo Scientific AquaSensors DataStick
Summarization of Contents
Hardware Setup
Ethernet Communications Adapter
Details the physical aspects and connections of the Ethernet Adapter.
Operating Temperature
Specifies the operating temperature range for the adapter.
Electrical Connections
Explains the RJ45 connector pin assignments and signal functions.
Location of Adapter's MAC Address
Guides users on finding the Ethernet adapter's MAC address.
LED Indicators
Describes the function and meaning of the adapter's LED indicators.
Restoring Default IP Address
Provides the procedure to reset network settings to factory defaults.
AV38 Local Display with Ethernet Option
Covers hardware setup specific to the AV38 display with Ethernet.
AV38 Electrical Connections
Details the RJ45 jack signal names and functions for the AV38.
AV38 MAC Address Location
Explains how to locate the MAC address on the AV38 Ethernet option.
AV38 Restoring Default IP Address
Procedure to reset AV38 network settings to factory default values.
Configuration Procedures
For Evaluation/Demonstration Purposes
Guides on setting up for product evaluation and demonstration.
Advanced Configuration
Details on configuring IP settings for network flexibility.
Commissioning an Ethernet Product for Service
Steps for configuring the product to connect to an existing network.
Web Server
Home Page
Describes the DataStick Measurement System Home Page features.
Calibration Page
Instructions for accessing and performing 1-point calibration.
Configuration Page
Guide to re-configuring DataStick settings via the web interface.
Communications Settings Page
Accessing and managing network settings and internal counters.
Viewing/Changing Communications Settings
Procedures for modifying network communication parameters.
Viewing/Clearing Internal Counters
Explains how to view and reset internal product counters.
Upgrading the Firmware
Details the process for updating the product's firmware.
EtherNet/IP
Electronic Data Sheet (EDS)
Information on the EtherNet/IP EDS file for configuration.
Definitions
Glossary of EtherNet/IP terms and data types.
Object Model
Overview of the EtherNet/IP object model structure and purpose.
Sensor Value Object
Accessing sensor and temperature values via the object model.
User Configuration Object
Managing user-configurable parameters through the object model.
Generic Sensor Calibration Object
Object model details for generic sensor calibration procedures.
Modbus TCP and PCCC
Modbus TCP
Overview of the Modbus TCP protocol and its industrial use.
Programmable Controller Communication Commands (PCCC)
How to use PCCC for communication with PLCs.
SLC 5/03 and SLC 5/04 PLCs
Connecting SLC 5/03 and 5/04 PLCs via Ethernet Interface.
Example SLC 5/03 Ladder Logic Programs
Ladder logic examples for reading sensor values from N20:01.
Modbus TCP and PCCC Register Map
Comprehensive register map for Modbus TCP and PCCC.
Need help?
Do you have a question about the AquaSensors DataStick and is the answer not in the manual?
Questions and answers