Related Manuals for Dentsply Sirona Orthophos SL 3D
Summarization of Contents
General Data and Contact Information
Dear Customer
Welcome message and introduction to the Orthophos SL X-ray system.
Contact Information
Details for contacting customer service and the manufacturer's address.
Copyright and Trademark
Information regarding copyright, trademarks, and software.
Operating Manual Information
Guidance on reading and using the operating manual and accessing technical documents.
Other Relevant Documents
List of additional documents for system components like Sidexis 4.
Warranty and Liability
Details on warranty, liability, and maintenance obligations for the system.
Intended Use and Contraindications
Specifies the intended applications and limitations for the X-ray system.
Safety Information and Precautions
Basic Safety Information
Fundamental safety rules and notes on unit operation, including symbols.
Ventilation Slots and Condensation
Instructions on ventilation slot usage and managing condensation.
Personnel Qualifications
Requirements for skilled and trained personnel operating the unit.
Radiation Protection Measures
Guidelines for radiation protection during exposures, including recommendations.
Emergency Stop and Laser Safety
Procedures for emergency stops and safety precautions for the laser light localizer.
Hygiene and Touchscreen Operation
Procedures for hygiene and proper operation of the touchscreen.
Trouble-free Operation and Interference
Guidelines for ensuring trouble-free operation and managing electronic interference.
Electromagnetic Compatibility and Changes
Information on EMC, structural alterations, and electromagnetic compatibility.
Electrostatic Discharge (ESD) Protection
Measures and physics related to protecting against electrostatic discharge.
Unit Description and Technical Data
Certification and Registration
Details on unit compliance with standards and CE marking.
Technical Data and Unit Specifications
Electrical, mechanical, and performance specifications for the unit.
Transport, Storage, and Operating Conditions
Environmental conditions for transport, storage, and operation.
Diagrams and Scattered Radiation Values
Cooling curves, heating curves, beam angles, and secondary scattered radiation values.
PC System Requirements
Hardware and software requirements for workstation PCs.
Overview of Exposure Programs
List of available exposure programs for panoramic, bitewing, TMJ, sinus, and cephalometric views.
Main Components of the Product
Identification and description of the basic unit and cephalometer components.
Easypad and Touchscreen Interface
Overview of the Easypad controls, touchscreen, and user interface elements.
Remote Control and Accessories
Description of the remote control unit and spare/consumable accessory parts.
Hygienic Protective Sleeves
Information on single-use protective sleeves for various unit parts.
Test Phantom for Acceptance/Constancy Test
Details on test phantoms for acceptance and constancy testing.
Installation and Start-up Procedures
Replacing Accessories on the Basic Unit
Instructions for replacing bite blocks, chin rests, and other accessories.
Using Universal and Spherical Bite Blocks
Guidance on using universal, occlusal, and spherical bite blocks.
Changing Temple and Temporomandibular Joint Supports
Procedure for switching between temple supports and TMJ supports.
Adjusting/Inserting Cephalometer Parts
Instructions for adjusting nose support and inserting carpus support plate.
Removing and Inserting the Ceph Sensor
Steps for safely removing and inserting the cephalometer sensor.
Operation and Exposure Acquisition
Switching the Unit On
Procedure for powering on the unit and starting the software.
Enabling Exposure Readiness in Sidexis 4
Steps to prepare Sidexis 4 for X-ray exposure acquisition.
Selecting Exposure Programs
Detailed descriptions of panoramic, bitewing, TMJ, sinus, and cephalometric exposure programs.
Volume Exposures (3D Imaging)
Information on 3D volume exposures, regions, modes (SD, HD, Low Dose).
Preparing and Releasing Exposures
Steps for preparing exposures and releasing the X-ray beam.
Canceling and Editing Exposures
Procedures for canceling an exposure and editing panoramic images.
Preselecting Basic and Start Settings
Customizing default settings for patient symbols and programs.
Adjusting Touchscreen and Info Screen
Configuring touchscreen click tone, intensity, and accessing unit information.
Rescue Programs for Data Transfer Issues
Procedures for recovering data during network or PC failures.
Using the Remote Control
Instructions for operating the X-ray unit using the remote control.
Service and Maintenance Procedures
Cleaning and Care Guidelines
Instructions for cleaning, disinfecting, and sterilizing unit components.
Inspection and Maintenance Schedule
Routine inspections, annual checks, and periodic maintenance requirements.
Malfunctions and Error Handling
Help Messages and Error Codes
Explanation of auxiliary messages and error code structure.
Error Description and Locality
Detailed descriptions of error types (E1-E7) and their locations.
Settings and Program Values
Panoramic Exposure Indices (1E, 2E)
Factory settings and user-defined values for panoramic exposures.
Volume Exposure Dose Information
Dose area product values for various volume exposure programs (VOL1, VOL2, VOL3).
Cephalometric Exposure Dose Parameters
Dose area product parameters for cephalometric images and dosage calculation.
Setting Ambient Light via Web Service
Instructions for adjusting the unit's ambient light settings via a web browser.
Disposal and Environmental Considerations
Dismantling, Reinstallation, and Recalibration
Procedures for dismantling, reassembling, and recalibrating the unit.
Disposal Procedures for Electronic Devices
Guidelines for environmentally friendly disposal of electrical and electronic devices.
X-ray Tube and Counterweight Disposal
Information on disposal of X-ray tubes and counterweights containing lead.
Need help?
Do you have a question about the Orthophos SL 3D and is the answer not in the manual?
Questions and answers