Setup Menu - ViewSonic PJ452 - LCD XGA Projector-4.9LBS User Manual

SETUP menu

With the SETUP menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item
ZOOM
KEYSTONE
WHISPER
MIRROR
VOLUME
ViewSonic PJ452
Using the buttons ▲/▼ adjusts the zoom (magnifying power).
Large ↔ Small
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data ↔ Lower in the data
• The adjustable range of this function will vary with the type of
input signal. At some signals, this function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under
the item MIRROR, if the projector screen is inclined or if the
projector is angled downward, this function may not work
correctly.
• When the zoom adjustment is set to the TELE side, this
correction may be excessive. This function should be used with
zoom set to WIDE whenever possible.
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL H:INVERT
════=══=══=══=══=══=══=════
Using the buttons ▲/▼ adjusts the volume.
High ↔ Low
Description
V:INVERT H&V:INVERT
34