Power On/Off; Turning On The Power - ViewSonic PJ452 - LCD XGA Projector-4.9LBS User Manual

Power on/off

Turning on the power

WARNING ►When the power is on, a strong light is emitted. Do not look
into the lens or vents of the projector.
NOTE • Turn the power on in right order. Please power on the projector before the
connected devices.
1. Make sure that the power cord is firmly and correctly connected to the projector
and outlet.
2. Open the lens cover, and set the power switch to the ON position.
The power indicator will light to solid orange. Then wait several seconds
because buttons may not function for these several seconds.
3. Press the STANDBY/ON button on the projector or remote control.
The projector lamp will light up and the POWER indicator will begin blinking
green. When the power is completely on, the indicator will stop blinking light
green.
To display the picture, select an input signal according to the section "Selecting an
input signal"
( 18)
ViewSonic PJ452
STANDBY/ON
button
.
POWER indicator
Power switch
16